Hoover HOC3B3558IN User Instructions
![Hoover HOC3B3558IN manual cover](/images/WPxcDQtIQYJyZUAPVGxlJhhD/thumbs/thumb175x175.webp)
To initiate the self-cleaning function, turn the function selector to the self-cleaning icon and set the thermostat to the required temperature. Then, follow the on-screen prompts to start the cleaning process.
First, check that the oven is correctly plugged in and that the circuit breaker is not tripped. Ensure the temperature settings are correct. If the problem persists, it could be a faulty heating element that might require professional service.
To replace the oven light bulb, first ensure the oven is turned off and cool. Remove the glass cover by unscrewing it, then replace the bulb with a new one of the same type and wattage. Screw the glass cover back on securely.
Use a soft cloth dampened with mild soap and water to clean the exterior surfaces. Avoid using abrasive cleaners or steel wool, as these can scratch the surface. Dry with a soft cloth to prevent streaks.
To adjust the shelves, simply tilt the front of the shelf upwards and pull it out of the oven. Choose the desired height and insert the shelf by tilting it upwards slightly and sliding it back into the desired position.
Unusual noises can be caused by loose parts, such as racks or trays. Ensure everything is securely placed. If the noise persists, it could be due to the fan or motor, which may require inspection by a technician.
Press the timer button, then use the plus and minus buttons to set the desired time. Once set, the timer will countdown and alert you when the time has elapsed.
Yes, aluminum foil can be used for covering dishes to prevent over-browning, but do not use it to line the oven bottom as it can affect heat distribution and damage the oven.
Check if the oven is properly connected to the power supply. If the connection is fine, try resetting the oven by turning it off at the mains for a few minutes, then turning it back on. If the problem persists, contact customer support.
Regular maintenance should be performed every 3-6 months, including checking door seals, cleaning filters, and inspecting for any signs of wear and tear. Always refer to the user manual for specific maintenance guidelines.