Hoover HDP 2D62B-80 User Instructions
![Hoover HDP 2D62B-80 manual cover](/images/SGXwicmbgzDpIeFMbwpKpAKV/thumbs/thumb175x175.webp)
To reset the Hoover HDP 2D62B-80, press and hold the start button for approximately 3 seconds until the indicator lights flash. This will reset the machine.
Use a high-quality dishwasher detergent. You can use tablets, powder, or gel detergent, depending on your preference. Ensure it's suitable for use in automatic dishwashers.
Remove the bottom rack to access the filter. Twist the filter counter-clockwise and lift it out. Rinse it under warm water to remove debris and replace it by twisting it clockwise until secure.
Check for blockages in the filter and drain hose. Ensure the drain hose is not kinked. Clean the filter and check the pump for obstructions.
Unusual noises may be caused by items in the dishwasher touching or the spray arms hitting dishes. Ensure dishes are loaded properly and check that spray arms can rotate freely.
Clean the filter and check the spray arms for blockages every month. Run a cleaning cycle with a dishwasher cleaner every 1-2 months to prevent buildup.
Yes, but place plastic items on the top rack to avoid damage from the heating element. Ensure they are dishwasher-safe to prevent warping.
Place larger items like pots and pans on the bottom rack, and smaller items like cups and glasses on the top rack. Make sure dishes are tilted for better water drainage.
Ensure the spray arms are not blocked and can rotate. Check the detergent dispenser and use the appropriate amount of detergent. Verify that the water temperature is at least 120°F (49°C).
Refer to the user manual for the specific error code meaning. Common solutions include checking for blockages, ensuring water supply, and resetting the dishwasher.