Hoover HDP 1DO39B-80 User Instructions
![Hoover HDP 1DO39B-80 manual cover](/images/OrWSzoauCZjDmWGDMWISauVk/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door securely, select your desired wash program using the controls, and press the start button.
Check the filter and drain hose for any blockages. Ensure that the drain hose is not kinked and is installed at the correct height. If the problem persists, consult the user manual or contact support.
Remove the lower rack, twist the filter counterclockwise, and lift it out. Rinse it under warm water and scrub with a soft brush. Reinstall by placing it back and twisting clockwise until secure.
Use a high-quality dishwasher detergent in the form of powder, liquid, or tablet. Ensure the detergent is suitable for automatic dishwashers. Avoid using regular dish soap.
Ensure that dishes are loaded correctly and not touching each other. Check for any foreign objects in the spray arms or filter area. Make sure the dishwasher is level and not touching the cabinetry.
Open the rinse aid dispenser cap and turn the dial inside to adjust the setting. Refer to the user manual for recommended settings based on your water hardness.
Regularly clean the filter, check the spray arms for clogs, wipe down the door seals, and run an empty cycle with a dishwasher cleaner monthly to remove buildup.
Ensure the door is fully closed and latched, check that the power supply is connected, and verify that the water supply is on. Also, confirm that the selected wash cycle is set correctly.
Error code E4 indicates a water overflow issue. Check for leaks and ensure the dishwasher is not overfilled. Inspect the inlet valve and float switch for proper operation.
Yes, you can wash plastic items, but ensure they are dishwasher-safe and place them on the top rack to avoid heat damage. Use a gentle wash cycle for best results.