Hoover DDY 062-80 User Instructions
![Hoover DDY 062-80 manual cover](/images/c495091bd678185b0e6730f3/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes into the dishwasher, add detergent, select your desired wash program using the control panel, and press the start button.
Check the filter and drain hose for blockages. Ensure the sink drain is not clogged. If the problem persists, consult the user manual or contact customer service for assistance.
Remove the lower rack to access the filter. Twist the filter counterclockwise and lift it out. Rinse it under running water to remove debris, then replace it by twisting it clockwise.
Ensure that the dishwasher is level and that dishes are loaded correctly, avoiding contact with the spray arms. Check for any foreign objects in the filter or spray arms.
Regularly clean the filter, check and clean the spray arms, wipe the door seals, and run an empty cycle with a dishwasher cleaner monthly to maintain optimal performance.
To reset the dishwasher, turn it off by pressing the power button, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on.
Check that the water supply is turned on and that the inlet hose is not kinked or blocked. Inspect the water inlet valve for any malfunctions.
Yes, you can use liquid detergent. Ensure you use the appropriate amount as specified in the user manual to prevent excess suds.
Open the rinse aid dispenser and turn the dial to adjust the setting. A higher number dispenses more rinse aid, which can help with drying and preventing spots.
Error code E3 typically indicates a heating issue. Check that the heating element is functioning properly and consult the manual or a professional technician if needed.