Epson SureColor T3475 Installation Guide

To perform a nozzle check, go to the printer's control panel, select 'Maintenance', then choose 'Nozzle Check'. Follow the on-screen instructions to print a nozzle check pattern.
First, check the connection between the printer and the computer. Ensure the printer is powered on and has sufficient ink. Run a printer diagnostic test and check for error messages on the display panel.
Open the ink cartridge cover, press the tab on the cartridge to release it, and remove it from the slot. Insert the new cartridge until it clicks into place, then close the cover.
Access the printer's control panel, select 'Maintenance', and choose 'Head Cleaning'. Follow the prompts to clean the print head. Avoid turning off the printer during this process.
The Epson SureColor T3475 supports a variety of paper types including plain paper, glossy photo paper, matte paper, and specialty media such as canvas and fine art papers.
On the printer's control panel, select 'Network Settings', then 'Wireless LAN Setup'. Follow the on-screen instructions to select your network and enter the password if needed.
Streaky prints are often due to clogged nozzles or low ink levels. Perform a nozzle check and clean the print head if necessary. Ensure the ink cartridges have sufficient ink.
Visit the Epson website to download the latest firmware for your model. Follow the included instructions to install the update, ensuring the printer remains connected and powered on during the process.
Regularly check and clean the print head, perform nozzle checks, replace ink cartridges as needed, and update the printer's firmware to ensure optimal performance.
Turn off the printer, carefully remove any jammed paper, and check for any remaining bits. Ensure the paper is properly loaded and not exceeding the capacity of the input tray.