Epson PowerLite EB-L200SW Installation Guide
en
ELPMB64 Installation Guide
2020 Epson America, Inc., 10/20 CPD-59300
About This Installation Guide
This guide describes how to mount the short-throw projectors PowerLite EB-L200SX/EB-L200SW to a wall using the Epson ELPMB64 wall mount.
Safety Instructions
For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling that ignores instructions in this guide could damage the wall mount or could result in personal injury or property damage. Keep this installation guide on hand for future reference.
Read the safety instructions in the online User's Guide for your projector and follow the instructions in this document.
Explanation of Symbols The warning marks shown below are used throughout this installation guide to prevent personal injury or property damage. Make sure you understand these warnings when reading this installation guide.
Safety Precautions for Installation
Not all models are available in all markets.
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
This symbol indicates related or useful information.
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
The wall mount is designed specifically for mounting a projector and optional accessories to a wall. If anything other than a projector and optional accessories are mounted, the weight may result in damage. If the wall mount falls, it could cause personal injury or property damage.
The installation work (wall mounting) should be performed by qualified technicians using only approved mounting equipment. Incomplete or incorrect installation could cause the wall mount or projector to fall and cause personal injury or property damage.
Follow the instructions in this guide when installing the wall mount. If the instructions are not followed, the wall mount may fall, resulting in personal injury or property damage.
Turn off the projector when installing the mount to avoid fire or electric shock.
Warning
Caution
Warning
2
En gl
is h
Incorrect handling may cause fire or electric shock. Observe the following precautions when handling: Do not handle the power plug with wet hands. Do not use a power cord that is damaged or modified. Do not pull the power cord with too much force when routing it through the wall mount.
Do not install the wall mount in a place where it might be subjected to vibration or shock. Vibration or shock could cause damage to the projector or mounting surface. It could also cause the wall mount or projector to fall and cause personal injury or property damage.
Install the wall mount so that it can sufficiently support the weight of the projector and wall mount, and resist any horizontal vibration. Use M8 nuts and bolts. Nuts and bolts smaller than M8 could cause the wall mount to fall. Epson accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate installation.
The installation work should be performed by at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop the wall mount. If the wall mount or projector falls, it could cause personal injury or property damage.
When installing the wall mount, do not hold on to the cable cover to position the mount. Holding the mount by the cable cover could cause the cover to detach, resulting in personal injury or property damage.
When you mount the projector on the wall with the wall mount, the wall requires enough strength to hold the projector and the wall mount. This wall mount should be installed on a concrete wall. Confirm the weight of the projector and the wall mount before installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce the wall before installation.
If you need to loosen any screws while installing, be careful not to drop the projector or the mount. If the wall mount or projector falls, it could cause personal injury or property damage.
Inspect the wall mount on a regular basis to ensure there are no broken parts or loose bolts or screws. If there are any broken parts, stop using the wall mount immediately. If the wall mount or projector falls, it could cause personal injury or property damage.
Never modify the wall mount.
Do not disassemble or modify the projector. There are numerous high-voltage components inside the projector that could cause a fire, electric shock, or an accident.
Do not hang on the wall mount or hang a heavy object on the wall mount. If the projector or wall mount falls, it could cause personal injury or property damage.
Stop using the mount and contact Epson if any of the following occur: The mount is dropped or damaged during installation. The arm unit detaches from the wall or falls.
Do not use adhesives, lubricants, or oils to install or adjust the wall mount. If you use adhesives to prevent the bolts or screws from loosening or things such as lubricants or oils on the part of the projector attached to the slide plate, the case may crack and cause the projector to fall, resulting in personal injury or property damage.
Tighten all screws firmly after adjustment. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
Never loosen the bolts and nuts after installation. Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
When performing wiring, make sure the cable does not come into contact with any screws or bolts. Handling the cable incorrectly may cause fire or electric shock.
Warning
3
Location
Determine where you will install the wall mount and prepare the location in advance. Also, make sure there is a gap of 16 to 26 inches (410 to 660 mm) from the top of the image projected onto the white board to the ceiling. See Positioning the Projector on page 10 for more details.
Do not install the projector in a location where it might be subjected to vibration or shock. Vibration or shock could cause damage to the projector or mounting surface. It could also cause the wall mount or projector to fall, resulting in serious injury or death.
Before installing the projector, verify the power supply wiring for the installation location.
Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of fluorescent lights could interfere with the projector remote control.
Install the projector away from direct sunlight and other bright light sources.
It is recommended to keep VGA computer cable length less than 66 feet (20 meters) to reduce external noise.
If you want to hide the projector power plug under the wall plate cover, make sure the power outlet is located in the cutout on the left or right of the wall plate. Depending on where the plug is placed within the opening, there is between 1.9 to 2.3 inches (48 to 57.5 mm) of space between the cutout and the wall plate cover.
Do not install the wall mount in a location where the operating temperature for your projector model may be exceeded. Such an environment may damage the projector.
Do not install in a location subject to oily smoke or smoke for events. If oils stick to the slide plate fixing part of the projector, the case may crack and cause the projector to fall, resulting in personal injury or property damage.
Install the wall mount in a place free from excessive dust and humidity to prevent the lens or optical components from becoming dirty.
Do not use excessive force when adjusting the wall mount. The wall mount may break, resulting in personal injury.
Caution
4
1 Package Contents s 6
2 Specifications s 7
3 Connecting Devices s 9
4 Positioning the Projector 1. Installation Measurements for PowerLite EB_L200SW - Wide
2. Installation Measurements for PowerLite EB-L200SW - Tele
3. Installation Measurements for PowerLite EB-L200SX - Wide
4. Installation Measurements for PowerLite EB-L200SX - Tele
s 11
5 Installing the Projector 1. Install the wall plate
2. Assemble the wall mount
3. Route the cables through the arm unit
4. Attach the wall mount to the wall plate
5. Attach the attachment plate to the projector
6. Attach the projector to the adjustment unit
7. Adjust the arm length
8. Connect the power cord and other cables to the projector
9. Attach the cable cover to the projector
10. Turn on the projector and check the image
11. Install the safety wire
12. Attach the arm cover
13. Attach the wall plate cover
s 19
5
1 Package Contents
Use the bolts or screws supplied with the wall mount to install it as directed in this guide. Do not substitute these bolts with any other types.
You need to use commercially available M8 60 mm or 3/8 inch anchors (at least 3) to attach the wall plate to the wall.
Gather the tools and parts you need before you begin installation.
Shape Name Quantity
M4 12 mm hexagon socket head cap bolt with washer
1
M4 12 mm hexagon socket head cap bolt without washer
6
M4 12 mm hexagon socket head cap bolt with washer/spring washer
5
M8 16 mm hexagon socket head cap bolt without washer
7
Hexagonal wrenches
Wall plate cover
Adjustment unit
Wall plateProjector attachment plate
Arm unit
Cable cover
Arm plate
Arm coverSafety wire kit
6
2 Specifications
Item Specification
Weight Approx. 21.4 lb (9.7 kg)
Maximum load capacity 14.3 lb (6.5 kg)
Arm length 39.4 to 59.4 inches (1000 to 1510 mm) (from wall plate attachment point to arm cover point)
Vertical height adjustment range 0 to 5.3 inches (0 to 134 mm) (arm length minimum) 0 to 9.1 inches (0 to 230 mm) (arm length maximum)
Vertical tilt adjustment range -7 to 17 (arm length minimum) -17 to 7 (arm length maximum)
Horizontal rotation adjustment range 0 to 5
Horizontal roll adjustment range 0 to 5
Horizontal slide adjustment range 0 to 1.8 inches (45 mm)
Vertical tilt adjustment
Horizontal rotation adjustment
Horizontal roll adjustment
Horizontal slide adjustment
Vertical height adjustment
7
Wall plate
*Offset from the center of the projected image to the center of the wall plate.
18 in. (457 mm)
8.0 in. (203 mm)4.2 in. (107 mm)
3.0 in. (75 mm)
0.6 in. (15 mm)
1.8 in. (46 mm)
4.7 in. (120 mm)
6. 3
in . (
16 0
m m
)
8. 7
in . (
22 2
m m
)
9. 1
in . (
23 0
m m
)
9. 7
in . (
24 7
m m
)
9.9 in. (251 mm)
11.8 in. (300 mm)
4.4 in. (112 mm)
3.1 in. (80 mm)*
8
3 Connecting Devices
Make sure you have the power cord, computer VGA or HDMI cable, and other parts at the location where the wall mount is to be installed.
Make sure you also have all necessary cables for devices, such as a document camera or microphone, that you will connect to the projector. This includes cables for any optional equipment that may be connected in the future. For details, refer to the online User's Guide or at epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean).
External speakers LAN device
Microphone
USB cable (for computer video and audio output)Epson document
camera (ELPDC07)
Computer
Computer VGA or HDMI cable (for computer video output)
Connection example
Dedicated USB cable (supplied with document camera)
Audio cable (not included)
LAN cable (not included)
9
4 Positioning the Projector
The PowerLite EB-L200SW can project up to 113 inches diagonally for a WXGA image or 100 inches diagonally for an XGA image using this mount. The PowerLite EB-L200SX can project up to 106 inches diagonally for an XGA image. You can project onto a pre-installed whiteboard or directly onto a plain wall. The height of the included wall mount determines how high the image appears on the wall or whiteboard. The distance of the projector from the wall (once it is mounted on the adjustable arm of the wall mount) also affects image size and position.
If you are planning to project on a whiteboard, the image may not fill the entire board, depending on the aspect ratio. If you match the image height to the boards height, gaps may appear on the sides of the board.
Refer to the tables on the following pages and install the mount and projector to project images at the appropriate size. The values are only a guide. The recommended projection distance is 27.6 to 46.9 inches (70 to 119 cm).
The values in the measurement tables are based on a 2.4 inch (6 cm) thick whiteboard. Make sure your whiteboard is no more than 2.4 inch (6 cm) thick.
Center of lens
Projected image
B
A
A: Minimum projection distance B: Vertical height adjustment C: Distance from top of image to ceiling D: Distance from top of image to center of lens
D
C
Arm plate
A: Vertical tilt adjustment: -7 to 17 (arm length minimum) -17 to 7 (arm length maximum)
B: Horizontal roll adjustment: 0 to 5 C: Horizontal rotation adjustment: 0 to 5 D: Horizontal slide adjustment: 0 to 1.8 inches (0 to 45 mm) E: Vertical height adjustment screw:
0 to 5.3 inches (0 to 134 mm) (arm length minimum) 0 to 9.1 inches (0 to 230 mm) (arm length maximum)
Adjustment unit
10
m
ge
f ) ) ) ) ) ) ) ) ) ) ) ) )
In st
al la
ti on
M ea
su re
m en
ts fo
r P ow
er Li
te E
B_ L2
00 SW
- W
id e
Sc re
en
si ze
16 :1
0 W
XG A
4: 3
XG A
16 :9
W id
es cr
ee n
M in
im um
pr
oj ec
ti on
di
st an
ce (A
)*
Ve rt
ic al
he
ig ht
ad
ju st
m en
t (B
)* *
D is
ta nc
e fr
om
to p
of im
ag e
to c
ei lin
g (C
)
D is
ta nc
e fr
om
to p
of im
ag e
to c
en te
r o f
le ns
(D )
M in
im um
pr
oj ec
ti on
di
st an
ce (A
)*
Ve rt
ic al
he
ig ht
ad
ju st
m en
t (B
)* *
D is
ta nc
e fr
om
to p
of im
ag e
to c
ei lin
g (C
)
D is
ta nc
e fr
om
to p
of im
ag e
to c
en te
r o f
le ns
(D )
M in
im um
pr
oj ec
ti on
di
st an
ce (A
)*
Ve rt
ic al
he
ig ht
ad
ju st
m en
t (B
)* *
D is
ta nc
e fr
om
to p
of im
ag e
to c
ei lin
g (C
)
D is
ta nc
e fr
o to
p of
im a
to c
en te
r o le
ns (D
)
60 in
. -
- -
- 27
.6 in
. ( 70
c m
) 1.
6 in
. ( 4
cm )
16 .9
in . (
43 c
m )
4. 3
in . (
11 c
m )
- -
-
61 in
. -
- -
- 28
in . (
71 c
m )
2 in
. ( 5
cm )
17 .3
in . (
44 c
m )
4. 3
in . (
11 c
m )
- -
-
62 in
. -
- -
- 28
.3 in
. ( 72
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
3 in
. ( 11
c m
) -
- -
63 in
. -
- -
- 29
.1 in
. ( 74
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
3 in
. ( 11
c m
) -
- -
64 in
. -
- -
- 29
.5 in
. ( 75
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
3 in
. ( 11
c m
) -
- -
65 in
. -
- -
- 29
.9 in
. ( 76
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
7 in
. ( 12
c m
) -
- -
66 in
. -
- -
- 30
.3 in
. ( 77
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 27
.6 in
. ( 70
c m
) 3.
5 in
. ( 9
cm )
18 .9
in . (
48 c
m )
5. 9
in . (
15 c
m
67 in
. -
- -
- 31
.1 in
. ( 79
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 28
in . (
71 c
m )
3. 9
in . (
10 c
m )
19 .2
in . (
49 c
m )
6. 3
in . (
16 c
m
68 in
. 27
.6 in
. ( 70
c m
) 1.
6 in
. ( 4
cm )
16 .9
in . (
43 c
m )
4. 3
in . (
11 c
m )
31 .5
in . (
80 c
m )
2 in
. ( 5
cm )
17 .7
in . (
45 c
m )
4. 7
in . (
12 c
m )
28 .3
in . (
72 c
m )
3. 9
in . (
10 c
m )
19 .3
in . (
49 c
m )
6. 3
in . (
16 c
m
69 in
. 27
.9 in
. ( 71
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
3 in
. ( 11
c m
) 31
.9 in
. ( 81
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 28
.7 in
. ( 73
c m
) 3.
9 in
. ( 10
c m
) 19
.3 in
. ( 49
c m
) 6.
3 in
. ( 16
c m
70 in
. 28
.4 in
. ( 72
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
3 in
. ( 11
c m
) 32
.3 in
. ( 82
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 5.
1 in
. ( 13
c m
) 29
.1 in
. ( 74
c m
) 3.
9 in
. ( 10
c m
) 19
.3 in
. ( 49
c m
) 6.
3 in
. ( 16
c m
71 in
. 29
in . (
73 c
m )
2 in
. ( 5
cm )
17 .3
in . (
44 c
m )
4. 3
in . (
11 c
m )
32 .7
in . (
83 c
m )
2 in
. ( 5
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
29 .5
in . (
75 c
m )
3. 9
in . (
10 c
m )
19 .7
in . (
50 c
m )
6. 3
in . (
16 c
m
72 in
. 29
.1 in
. ( 74
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
3 in
. ( 11
c m
) 33
.5 in
. ( 85
c m
) 2
in . (
5 cm
) 18
.1 in
. ( 46
c m
) 5.
1 in
. ( 13
c m
) 30
.3 in
. ( 77
c m
) 3.
9 in
. ( 10
c m
) 19
.7 in
. ( 50
c m
) 6.
7 in
. ( 17
c m
73 in
. 29
.5 in
. ( 75
c m
) 2
in . (
5 cm
) 17
.3 in
. ( 44
c m
) 4.
7 in
. ( 12
c m
) 33
.9 in
. ( 86
c m
) 2
in . (
5 cm
) 18
.1 in
. ( 46
c m
) 5.
1 in
. ( 13
c m
) 30
.7 in
. ( 78
c m
) 3.
9 in
. ( 10
c m
) 19
.7 in
. ( 50
c m
) 6.
7 in
. ( 17
c m
74 in
. 30
.3 in
. ( 77
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 34
.3 in
. ( 87
c m
) 2.
4 in
. ( 6
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
31 .1
in . (
79 c
m )
3. 9
in . (
10 c
m )
19 .7
in . (
50 c
m )
6. 7
in . (
17 c
m
75 in
. 30
.7 in
. ( 78
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 34
.7 in
. ( 88
c m
) 2.
4 in
. ( 6
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
31 .5
in . (
80 c
m )
3. 9
in . (
10 c
m )
19 .7
in . (
50 c
m )
6. 7
in . (
17 c
m
76 in
. 31
.1 in
. ( 79
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 35
.4 in
. ( 90
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
31 .9
in . (
81 c
m )
4. 3
in . (
11 c
m )
20 .1
in . (
51 c
m )
7. 1
in . (
18 c
m
77 in
. 31
.5 in
. ( 80
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 35
.8 in
. ( 91
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
32 .3
in . (
82 c
m )
4. 3
in . (
11 c
m )
20 .1
in . (
51 c
m )
7. 1
in . (
18 c
m
78 in
. 31
.9 in
. ( 81
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 36
.2 in
. ( 92
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
32 .7
in . (
83 c
m )
4. 3
in . (
11 c
m )
20 .1
in . (
51 c
m )
7. 1
in . (
18 c
m
11
) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )m
ge
f
79 in
. 32
.3 in
. ( 82
c m
) 2
in . (
5 cm
) 17
.7 in
. ( 45
c m
) 4.
7 in
. ( 12
c m
) 36
.6 in
. ( 93
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
33 .1
in . (
84 c
m )
4. 3
in . (
11 c
m )
20 .1
in . (
51 c
m )
7. 1
in . (
18 c
m
80 in
. 32
.7 in
. ( 83
c m
) 2
in . (
5 cm
) 18
.1 in
. ( 46
c m
) 5.
1 in
. ( 13
c m
) 37
in . (
94 c
m )
2. 4
in . (
6 cm
) 18
.5 in
. ( 47
c m
) 5.
.5 in
. ( 14
c m
) 33
.5 in
. ( 85
c m
) 4.
3 in
. ( 11
c m
) 20
.5 in
. ( 52
c m
) 7.
5 in
. ( 19
c m
81 in
. 33
in . (
84 c
m )
2 in
. ( 5
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
37 .8
in . (
96 c
m )
2. 4
in . (
6 cm
) 18
.5 in
. ( 47
c m
) 5.
9 in
. ( 15
c m
) 34
.3 in
. ( 87
c m
) 4.
3 in
. ( 11
c m
) 20
.5 in
. ( 52
c m
) 7.
5 in
. ( 19
c m
82 in
. 33
.5 in
. ( 85
c m
) 2.
4 in
. ( 6
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
38 .2
in . (
97 c
m )
2. 4
in . (
6 cm
) 18
.5 in
. ( 47
c m
) 5.
9 in
. ( 15
c m
) 34
.7 in
. ( 88
c m
) 4.
3 in
. ( 11
c m
) 20
.5 in
. ( 52
c m
) 7.
5 in
. ( 19
c m
83 in
. 33
.9 in
. ( 86
c m
) 2.
4 in
. ( 6
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
38 .6
in . (
98 c
m )
2. 4
in . (
6 cm
) 18
.5 in
. ( 47
c m
) 5.
9 in
. ( 15
c m
) 35
in . (
89 c
m )
4. 3
in . (
11 c
m )
20 .5
in . (
52 c
m )
7. 5
in . (
19 c
m
84 in
. 34
.3 in
. ( 87
c m
) 2.
4 in
. ( 6
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
39 in
. ( 99
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. 9
in . (
15 c
m )
35 .4
in . (
90 c
m )
4. 3
in . (
11 c
m )
20 .9
in . (
53 c
m )
7. 5
in . (
19 c
m
85 in
. 34
.7 in
. ( 88
c m
) 2.
4 in
. ( 6
cm )
18 .1
in . (
46 c
m )
5. 1
in . (
13 c
m )
39 .8
in . (
10 1
cm )
2. 4
in . (
6 cm
) 18
.9 in
. ( 48
c m
) 5.
9 in
. ( 15
c m
) 35
.8 in
. ( 91
c m
) 4.
7 in
. ( 12
c m
) 20
.9 in
. ( 53
c m
) 7.
9 in
. ( 20
c m
86 in
. 35
.4 in
. ( 90
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
40 .2
in . (
10 2
cm )
2. 4
in . (
6 cm
) 19
.3 in
. ( 49
c m
) 5.
9 in
. ( 15
c m
) 36
.2 in
. ( 92
c m
) 4.
7 in
. ( 12
c m
) 20
.9 in
. ( 53
c m
) 7.
9 in
. ( 20
c m
87 in
. 35
.8 in
. ( 91
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
40 .6
in . (
10 3
cm )
2. 4
in . (
6 cm
) 19
.3 in
. ( 49
c m
) 6.
3 in
. ( 16
c m
) 36
.6 in
. ( 93
c m
) 4.
7 in
. ( 12
c m
) 20
.9 in
. ( 53
c m
) 7.
9 in
. ( 20
c m
88 in
. 36
.2 in
. ( 92
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
40 .9
in . (
10 4
cm )
2. 8
in . (
7 cm
) 19
.3 in
. ( 49
c m
) 6.
3 in
. ( 16
c m
) 37
in . (
94 c
m )
4. 7
in . (
12 c
m )
20 .9
in . (
53 c
m )
7. 9
in . (
20 c
m
89 in
. 36
.6 in
. ( 93
c m
) 2.
4 in
. ( 6
cm )
18 .5
in . (
47 c
m )
5. .5
in . (
14 c
m )
41 .3
in . (
10 5
cm )
2. 8
in . (
7 cm
) 19
.3 in
. ( 49
c m
) 6.
3 in
. ( 16
c m
) 37
.4 in
. ( 95
c m
) 4.
7 in
. ( 12
c m
) 21
.3 in
. ( 54
c m
) 8.
3 in
. ( 21
c m
90 in
. 37
in . (
94 c
m )
2. 4
in . (
6 cm
) 18
.5 in
. ( 47
c m
) 5.
.5 in
. ( 14
c m
) 42
.1 in
. ( 10
7 cm
) 2.
8 in
. ( 7
cm )
19 .3
in . (
49 c
m )
6. 3
in . (
16 c
m )
38 .2
in . (
97 c
m )
4. 7
in . (
12 c
m )
21 .3
in . (
54 c
m )
8. 3
in . (
21 c
m
91 in
. 37
.4 in
. ( 95
c m
) 2.
4 in
. ( 6
cm )
18 .9
in . (
48 c
m )
5. .5
in . (
14 c
m )
42 .5
in . (
10 8
cm )
2. 8
in . (
7 cm
) 19
.7 in
. ( 50
c m
) 6.
3 in
. ( 16
c m
) 38
.6 in
. ( 98
c m
) 4.
7 in
. ( 12
c m
) 21
.3 in
. ( 54
c m
) 8.
3 in
. ( 21
c m
92 in
. 37
.8 in
. ( 96
c m
) 2.
4 in
. ( 6
cm )
18 .9
in . (
48 c
m )
5. 9
in . (
15 c
m )
42 .9
in . (
10 9
cm )
2. 8
in . (
7 cm
) 19
.7 in
. ( 50
c m
) 6.
3 in
. ( 16
c m
) 39
in . (
99 c
m )
4. 7
in . (
12 c
m )
21 .3
in . (
54 c
m )
8. 3
in . (
21 c
m
93 in
. 38
.2 in
. ( 97
c m
) 2.
4 in
. ( 6
cm )
18 .9
in . (
48 c
m )
5. 9
in . (
15 c
m )
43 .3
in . (
11 0
cm )
2. 8
in . (
7 cm
) 19
.7 in
. ( 50
c m
) 6.
7 in
. ( 17
c m
) 39
.4 in
. ( 10
0 cm
) 5.
1 in
. ( 13
c m
) 21
.7 in
. ( 55
c m
) 8.
7 in
. ( 22
c m
94 in
. 38
.6 in
. ( 98
c m
) 2.
4 in
. ( 6
cm )
18 .9
in . (
48 c
m )
5. 9
in . (
15 c
m )
43 .7
in . (
11 1
cm )
2. 8
in . (
7 cm
) 19
.7 in
. ( 50
c m
) 6.
7 in
. ( 17
c m
) 39
.8 in
. ( 10
1 cm
) 5.
1 in
. ( 13
c m
) 21
.7 in
. ( 55
c m
) 8.
7 in
. ( 22
c m
95 in
. 39
in . (
99 c
m )
2. 4
in . (
6 cm
) 18
.9 in
. ( 48
c m
) 5.
9 in
. ( 15
c m
) 44
.5 in
. ( 11
3 cm
) 2.
8 in
. ( 7
cm )
19 .7
in . (
50 c
m )
6. 7
in . (
17 c
m )
40 .2
in . (
10 2
cm )
5. 1
in . (
13 c
m )
21 .7
in . (
55 c
m )
8. 7
in . (
22 c
m
96 in
. 39
.4 in
. ( 10
0 cm
) 2.
4 in
. ( 6
cm )
18 .9
in . (
48 c
m )
5. 9
in . (
15 c
m )
44 .9
in . (
11 4
cm )
2. 8
in . (
7 cm
) 20
.1 in
. ( 51
c m
) 6.
7 in
. ( 17
c m
) 40
.6 in
. ( 10
3 cm
) 5.
1 in
. ( 13
c m
) 21
.7 in
. ( 55
c m
) 8.
7 in
. ( 22
c m
97 in
. 39
.8 in
. ( 10
1 cm
) 2.
8 in
. ( 7
cm )
19 .3
in . (
49 c
m )
5. 9
in . (
15 c
m )
45 .3
in . (
11 5
cm )
2. 8
in . (
7 cm
) 20
.1 in
. ( 51
c m
) 6.
7 in
. ( 17
c m
) 40
.9 in
. ( 10
4 cm
) 5.
1 in
. ( 13
c m
) 21
.7 in
. ( 55
c m
) 8.
7 in
. ( 22
c m
98 in
. 40
.2 in
. ( 10
2 cm
) 2.
8 in
. ( 7
cm )
19 .3
in . (
49 c
m )
6. 3
in . (
16 c
m )
45 .7
in . (
11 6
cm )
2. 8
in . (
7 cm
) 20
.1 in
. ( 51
c m
) 7.
1 in
. ( 18
c m
) 41
.3 in
. ( 10
5 cm
) 5.
1 in
. ( 13
c m
) 22
.1 in
. ( 56
c m
) 9.
1 in
. ( 23
c m
Sc re
en
si ze
16 :1
0 W
XG A
4: 3
XG A
16 :9
W id
es cr
ee n
M in
im um
pr
oj ec
ti on
di
st an
ce (A
)*
Ve rt
ic al
he
ig ht
ad
ju st
m en
t (B
)* *
D is
ta nc
e fr
om
to p
of im
ag e
to c
ei lin
g (C
)
D is
ta nc
e fr
om
to p
of im
ag e
to c
en te
r o f
le ns
(D )
M in
im um
pr
oj ec
ti on
di
st an
ce (A
)*
Ve rt
ic al
he
ig ht
ad
ju st
m en
t (B
)* *
D is
ta nc
e fr
om
to p
of im
ag e
to c
ei lin
g (C
)
D is
ta nc
e fr
om
to p
of im
ag e
to c
en te
r o f
le ns
(D )
M in
im um
pr
oj ec
ti on
di
st an
ce (A
)*
Ve rt
ic al
he
ig ht
ad
ju st
m en
t (B
)* *
D is
ta nc
e fr
om
to p
of im
ag e
to c
ei lin
g (C
)
D is
ta nc
e fr
o to
p of
im a
to c
en te
r o le
ns (D
)