Epson LQ-570e Product Information Guide
![Epson LQ-570e manual cover](/images/f65f469f598bbda6041f4911/thumbs/thumb175x175.webp)
To load paper into the Epson LQ-570e, open the paper guide and adjust the edge guides to fit the width of the paper. Insert the paper into the feeder, aligning it with the right edge guide, then close the paper guide.
Ensure that the ribbon cartridge is installed properly and has not run out of ink. Check the paper path for any obstructions and make sure the document you are printing contains text or images.
Turn off the printer and unplug it. Open the printer cover and gently clean the print head with a lint-free cloth dampened with isopropyl alcohol. Allow it to dry before reconnecting and powering on the printer.
Check for any torn pieces of paper inside the printer. Make sure the paper is not folded or creased and that the paper type is compatible with the printer. Adjust the paper guides to match the paper size.
Power off the printer and open the top cover. Remove the used ribbon cartridge by lifting it out. Insert the new cartridge by aligning it with the slots and pressing down until it clicks into place.
Check the paper for any damage and ensure it is loaded correctly in the feeder. Verify that the paper type and size settings on the printer match the paper being used.
Connect the printer to your computer using a parallel or USB cable. Install the appropriate printer driver on your computer. Follow the on-screen instructions to complete the setup process.
Ensure that the ribbon cartridge is not worn out and is installed correctly. Clean the print head and check for any obstructions that might be affecting the print quality.
Yes, the Epson LQ-570e is capable of printing on multi-part forms. Make sure to load the paper correctly and adjust the print head gap lever for thicker media.
To perform a self-test, turn off the printer. Hold down the LF/FF button while turning the printer back on. Release the button once the printer starts printing the self-test page.