Brother MFC-J1010DW Safety Guide
![Brother MFC-J1010DW manual cover](/images/YpiTzPSdteAmQLGbtAsXINib/thumbs/thumb175x175.webp)
To connect your Brother MFC-J1010DW to a wireless network, use the control panel to select 'Setup Wizard' under 'Network' settings, then follow the prompts to select your network and enter the password.
Ensure the printer is turned on, check for any error messages, verify that it is connected to the correct network, and confirm that there is paper and ink. If issues persist, try reinstalling the printer drivers.
To perform a factory reset, go to 'Settings' on the printer's control panel, select 'Initial Setup', then choose 'Reset' and confirm the reset operation.
Regular maintenance includes cleaning the print head, checking for paper jams, keeping the exterior clean, and replacing ink cartridges as needed.
To update firmware, download the latest version from Brother’s official website, then follow the instructions to install it using a USB connection or over the network.
This issue can occur if ink cartridges are empty or improperly installed, or if the print head is clogged. Check the ink levels and clean the print head from the printer's maintenance menu.
Place your document on the scanner glass, select 'Scan' from the control panel, choose your scan preferences, and press 'Start'. You can save the scan to a connected computer or USB drive.
Turn off the printer, carefully open the paper tray and any access panels, gently remove the jammed paper, and ensure no scraps are left inside. Restart the printer and try printing again.
Open the ink cartridge cover, press the lock release lever to remove the old cartridge, unpack the new cartridge, insert it into the correct color slot, and close the cover.
Yes, you can print from mobile devices using Brother's iPrint&Scan app, AirPrint for iOS devices, or Google Cloud Print. Ensure the printer is connected to the same network as your device.