ASUS ZenPad 8.0 (Z380CX) User Manual
![ASUS ZenPad 8.0 (Z380CX) Tablet manual cover](/images/EQWaVCfBNeuFcJxLZqmJrwTD/thumbs/thumb175x175.webp)
To perform a factory reset on your ASUS ZenPad 8.0, go to Settings > Backup & reset > Factory data reset. Follow the on-screen instructions to complete the reset. Ensure you back up any important data as this process will erase all data on the device.
If your ZenPad 8.0 is not charging, first check the charger and cable for damage. Try using a different charger and cable. Clean the charging port with a soft brush to remove any debris. If the problem persists, it may be a hardware issue that requires professional repair.
To take a screenshot on the ASUS ZenPad 8.0, press and hold the Power and Volume Down buttons simultaneously for a few seconds until the screen flashes. The screenshot will be saved in the Gallery.
To extend the battery life, reduce screen brightness, limit background app activity, and disable Wi-Fi and Bluetooth when not in use. Use Power Saver mode available in the settings for additional battery saving options.
If your ZenPad keeps restarting, try a soft reset by holding the Power button until the device restarts. Remove any recently installed apps that might be causing the issue. If problems persist, consider a factory reset or contact support.
To update the firmware, go to Settings > About tablet > System update. Check for updates and follow the prompts to download and install the latest firmware. Ensure your device is charged and connected to Wi-Fi during the update.
Yes, the ASUS ZenPad 8.0 supports microSD cards up to 64GB. Insert the microSD card into the slot on the side of the device. Once inserted, the tablet should automatically detect the card and make it available for use.
If your ZenPad is running slow, try clearing the cache, closing unused apps, and restarting the device. Check for software updates that might optimize performance. Consider uninstalling apps that consume a lot of resources.
To connect to Wi-Fi, swipe down from the top of the screen to access Quick Settings, then tap the Wi-Fi icon. Select your network from the list and enter the password if required. Tap Connect to join the network.
If the screen is unresponsive, try performing a soft reset by holding the Power button until the device restarts. Remove any screen protectors or cases that might be interfering with touch. If the issue continues, it may need service.