ASUS P5K SE User Manual
![ASUS P5K SE Motherboard manual cover](/images/kTXqKELPUyfQCuSlFNNUeMoY/thumbs/thumb175x175.webp)
To update the BIOS on your ASUS P5K SE, download the latest BIOS file from the ASUS website. Use a USB drive to transfer the file to your computer. Enter the BIOS by pressing 'Del' during startup, and use the EZ Flash utility to update the BIOS from the file on your USB drive.
The ASUS P5K SE motherboard supports up to 8GB of DDR2 RAM across its four memory slots, with a maximum of 2GB per slot.
To clear the CMOS, turn off your computer and unplug it from the power source. Locate the CMOS jumper near the battery on your motherboard and move it from the default position (pins 1-2) to pins 2-3 for about 10 seconds, then move it back. Alternatively, you can remove the CMOS battery for a few minutes and then re-insert it.
Yes, the ASUS P5K SE motherboard supports RAID 0, RAID 1, RAID 5, and RAID 10 configurations using the Intel ICH9R Southbridge. You can set up RAID in the BIOS under the "Advanced" settings.
The ASUS P5K SE motherboard includes one PCIe x16 slot, two PCIe x1 slots, and three PCI slots for various expansion cards.
For a no POST issue, check the power connections to the motherboard, reseat the RAM and any expansion cards, and ensure the CPU is properly seated. Disconnect any non-essential peripherals and try booting with minimal hardware. Also, attempt clearing the CMOS to reset the BIOS settings.
The ASUS P5K SE motherboard supports Intel LGA775 processors, including Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, and Celeron processors. Check the ASUS website for the latest CPU compatibility list.
Yes, you can use a PCIe 3.0 graphics card with the ASUS P5K SE motherboard, but the card will operate at PCIe 1.0 speeds due to the motherboard's PCIe x16 slot specification.
To enable AHCI on the ASUS P5K SE, enter the BIOS setup by pressing 'Del' during startup. Navigate to the "Advanced" tab, select "SATA Configuration," and change the SATA mode to AHCI. Save the changes and reboot your system.
Ensure that the CPU cooler is properly installed and the thermal paste is applied correctly. Check that all fans are functioning and free of dust. Improve case airflow by adding additional fans if necessary, and consider reapplying thermal paste if the issue persists.