ASUS VZ24EHE User Manual
![ASUS VZ24EHE Monitor manual cover](/images/ffHBBVVkryxrNToSoQzmGLog/thumbs/thumb175x175.webp)
To adjust the brightness and contrast, press the button on the monitor to bring up the on-screen display (OSD) menu. Navigate to the Brightness/Contrast settings using the arrow buttons and adjust the levels as needed.
First, ensure that the video cable is securely connected to both the monitor and the computer. Then, check that the correct input source is selected in the monitor's OSD menu. If the problem persists, try restarting your computer or using a different video cable.
To enable the blue light filter, access the OSD menu by pressing the menu button on the monitor. Navigate to the Blue Light Filter option and select the desired filter level to reduce eye strain.
The recommended resolution for the ASUS VZ24EHE monitor is 1920x1080 (Full HD) at a refresh rate of 75 Hz. Ensure your graphics card supports this resolution and refresh rate for optimal performance.
To clean your monitor, turn it off and unplug it. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Gently wipe the screen without applying too much pressure. Avoid using paper towels or abrasive materials.
The ASUS VZ24EHE monitor does not have built-in speakers. Connect external speakers directly to your computer's audio output or use a separate audio interface if needed.
If you notice dead pixels, try using a pixel repair software or gently massaging the affected area with a soft cloth. If the issue persists, contact ASUS support for further assistance or warranty claims.
Connect each monitor to your computer using the appropriate video cables. In your operating system's display settings, configure the monitors for either extended or mirrored displays, and adjust their positions as needed.
Visit the ASUS support website and search for your monitor model to find the latest drivers. Download and install the drivers following the provided instructions, ensuring your computer recognizes the monitor correctly.
To perform a factory reset, open the OSD menu by pressing the monitor's menu button. Navigate to the 'System Setup' option and select 'Reset' to restore the monitor to its default settings.