ASUS RT-N13U B1 User Manual

To set up your ASUS RT-N13U B1 router, connect it to your modem and computer using Ethernet cables. Open a web browser and enter "http://192.168.1.1" in the address bar. Log in using the default credentials (admin/admin). Follow the Quick Internet Setup wizard to configure your internet connection.
If you forget your login password, you will need to reset the router to its factory settings. To do this, press and hold the reset button on the back of the router for about 10 seconds until the power LED starts blinking. This will restore the default username and password (admin/admin).
To update the firmware, first download the latest firmware from the ASUS support website. Log in to the router's web interface, go to Administration > Firmware Upgrade, and upload the firmware file. Follow the on-screen instructions to complete the upgrade.
To set up a guest network, log in to your router's interface, navigate to the Guest Network section, and enable the guest network feature. Configure the SSID and security settings as desired, then apply the changes.
Check that all cables are securely connected and that the modem is functioning properly. Restart both the modem and the router. If the issue persists, log in to the router's interface and verify the WAN settings under Internet Setup.
To improve wireless signal strength, place the router in a central location away from obstructions and interference sources. Consider changing the wireless channel in the router settings to a less congested one. Using a Wi-Fi extender can also help boost the signal.
Log in to the router's web interface, navigate to the Parental Control section, and enable the feature. You can then set access restrictions for specific devices based on time schedules and content filtering rules.
The default IP address for accessing the ASUS RT-N13U B1 router's settings is "192.168.1.1". Enter this address in a web browser to access the login page.
To configure a VPN, access the router's web interface and navigate to VPN settings. Enter the VPN details provided by your VPN service provider. Save the settings and connect to the VPN.
To reset the router to factory settings, press and hold the reset button on the back of the router for about 10 seconds until the power LED starts blinking. This will erase all custom settings and restore the default configuration.