ASUS ROG Chakram User Manual
![ASUS ROG Chakram Mouse manual cover](/images/VSjwmGfjyIIlOuaxxQawgono/thumbs/thumb175x175.webp)
To customize the buttons on your ASUS ROG Chakram Mouse, use the Armoury Crate software. Open the software, navigate to the "Buttons" tab, and assign functions or macros to the buttons as per your preference.
If your ASUS ROG Chakram Mouse is not responding, try the following steps: 1) Check the connection and ensure the USB dongle is properly connected. 2) Replace or recharge the battery. 3) Update the mouse firmware via Armoury Crate.
To adjust the DPI settings, open Armoury Crate, go to the "Performance" tab, and configure the DPI settings to your desired levels. You can also use the DPI button on the mouse for quick adjustments.
Yes, the ASUS ROG Chakram Mouse can be used in wired mode while it is charging. Simply connect the USB cable to the mouse and your computer.
To change the RGB lighting effects, open Armoury Crate, navigate to the "Lighting" tab, and choose from various preset lighting effects or customize your own.
The joystick feature on the ASUS ROG Chakram Mouse can be used for navigation or as a gaming control. To use it, configure its settings in Armoury Crate under the "Joystick" tab. You can assign it to act as a directional pad or an analog stick.
To perform a factory reset, turn off the mouse, then hold down the left, right, and scroll buttons simultaneously and turn the mouse back on. This will reset the mouse to its default settings.
Cursor jitter or lag can be caused by wireless interference or low battery. Ensure that the battery is charged and the USB dongle is placed in a port with minimal interference. Updating the mouse firmware can also help resolve this issue.
To update the firmware, open Armoury Crate, and if a firmware update is available, you will see a prompt to install it. Follow the on-screen instructions to complete the update process.
The ASUS ROG Chakram Mouse offers up to 79 hours of battery life without lighting. To maximize battery life, reduce RGB brightness, use power-saving settings in Armoury Crate, and turn off the mouse when not in use.