ASUS PRIME A520M-A II User Manual
![ASUS PRIME A520M-A II Motherboard manual cover](/images/ZxOWLTfHFPuhOFUrsAwXyQAN/thumbs/thumb175x175.webp)
To install RAM, open the retention clips on the DIMM slots. Align the RAM module's notch with the slot's key, then press down until the module clicks into place and the clips lock.
Check all power connections, ensure RAM and GPU are seated properly, and verify CPU installation. If issues persist, try booting with minimal hardware to isolate the problem.
Download the latest BIOS from the ASUS website, save it to a USB drive, and use the EZ Flash utility in the BIOS menu to perform the update.
The ASUS PRIME A520M-A II supports AMD Ryzen 5000, 4000 G-Series, and 3000 Series desktop processors. Check ASUS's CPU support list for details.
Refer to the motherboard manual for the pin layout. Connect the power switch, reset switch, HDD LED, and power LED to the corresponding pins on the front panel header.
Enter the BIOS setup, navigate to the AI Tweaker section, and enable the DOCP profile which is ASUS's equivalent of XMP for optimized RAM settings.
Check for proper USB header connections, update motherboard drivers, and ensure the ports are enabled in the BIOS. Test with different devices to isolate the issue.
Locate the M.2 slot on the motherboard, remove the mounting screw, insert the M.2 SSD at an angle, and secure it with the screw. Ensure the SSD is recognized in the BIOS.
The ASUS PRIME A520M-A II supports PCIe 3.0 x16 graphics cards. Ensure compatibility by checking the card's power requirements and dimensions against your case.
Use ASUS AI Suite or third-party software like HWMonitor to track temperatures. Ensure proper airflow in your case to maintain optimal temperature levels.