ASUS P5N32-SLI SE Deluxe User Manual
![ASUS P5N32-SLI SE Deluxe Motherboard manual cover](/images/iPIfobUHTmZmrtvcfBftxcIJ/thumbs/thumb175x175.webp)
The ASUS P5N32-SLI SE Deluxe Motherboard is compatible with Intel LGA775 processors, including the Intel Core 2 Extreme, Core 2 Duo, Pentium D, and Pentium 4 processors.
To enable SLI, install two compatible NVIDIA graphics cards in the PCIe x16 slots, connect the SLI bridge, and ensure the SLI mode is enabled in the NVIDIA Control Panel under '3D Settings'.
This motherboard supports dual-channel DDR2 memory, with support for DDR2 800/667/533 MHz non-ECC, unbuffered memory modules up to a maximum of 8GB.
To update the BIOS, download the latest BIOS version from the ASUS support website, use the ASUS Update utility, or update via the EZ Flash utility by entering the BIOS setup during boot.
Ensure that the RAM modules are correctly seated in the slots. Check the motherboard manual for compatible memory configurations and update the BIOS if necessary to support newer memory modules.
Check for proper power connections, ensure RAM and CPU are seated properly, clear CMOS by removing the battery, and verify BIOS settings. Also, check for hardware compatibility issues.
Ensure proper airflow by installing additional case fans, use high-quality thermal paste on the CPU, and consider upgrading to a more efficient CPU cooler.
Enter the BIOS setup, enable RAID in the SATA configuration, and use the NVIDIA RAID utility during boot to configure the RAID array as per your requirements.
To reset the BIOS settings, enter the BIOS setup during boot, navigate to the 'Exit' menu, and select 'Load Setup Defaults'. Save and exit to apply the changes.
Yes, you can use a PCIe 3.0 graphics card in the PCIe x16 slots, but it will operate at PCIe 1.0 speeds due to the motherboard's PCIe version limitations.