ASUS P5B-V User Manual
![ASUS P5B-V Motherboard manual cover](/images/BuryMvzDWPRYDaUGNdroPLSo/thumbs/thumb175x175.webp)
To update the BIOS, download the latest BIOS file from the ASUS support website. Use the ASUS EZ Flash utility available in the BIOS setup to update the BIOS.
Check power connections, ensure RAM is seated properly, verify CPU installation, and reset the CMOS by removing the battery or using the jumper.
Enter the BIOS setup, navigate to the 'Advanced' tab, and enable Intel Virtualization Technology (VT-x) under the CPU configuration section.
The ASUS P5B-V supports up to 8GB of DDR2 RAM, with a maximum of 2GB per slot.
Ensure the monitor is connected properly, check the graphics card and its seating, try using onboard graphics, and reseat the RAM.
Drivers can be downloaded from the official ASUS website by navigating to the support section and selecting the P5B-V model.
To reset the CMOS, turn off the computer, unplug it, and remove the battery for a few minutes. Alternatively, use the CLRTC jumper.
Yes, you can use a SATA SSD. Connect it to a SATA port on the motherboard for improved performance over traditional HDDs.
Enter the BIOS, enable RAID in the SATA configuration, and use the Intel Matrix Storage Manager to configure RAID arrays.
Ensure audio is enabled in the BIOS, update audio drivers, and check speaker connections. Also, verify audio settings in the operating system.