ASUS P12R-E User Manual

To update the BIOS on the ASUS P12R-E motherboard, download the latest BIOS version from the ASUS support website. Use the ASUS EZ Flash utility in the BIOS setup to execute the update. Ensure to backup your current BIOS settings before proceeding.
The ASUS P12R-E motherboard supports a maximum RAM capacity of 128GB, utilizing ECC/unbuffered DDR4 memory.
First, check all power and data connections. Ensure RAM is properly seated, and remove any non-essential peripherals. Use the onboard diagnostic LEDs to identify hardware issues. Refer to the motherboard manual for specific error codes and troubleshooting steps.
The ASUS P12R-E motherboard is compatible with Intel Xeon E and Intel Core processors, fitting the LGA 1200 socket. Refer to the ASUS website for a complete list of supported CPUs.
To reset the CMOS, power off the system and unplug it. Locate the CMOS jumper on the motherboard and move it from the default position to the reset position for a few seconds, then return it to the default position. Alternatively, remove the CMOS battery for about 10 minutes and then reinstall it.
Yes, the ASUS P12R-E motherboard supports RAID configurations. It offers RAID 0, 1, 5, and 10 through the Intel Rapid Storage Technology enterprise software.
Ensure that the SATA cables are securely connected to both the motherboard and drives. Check the BIOS settings to confirm that the SATA ports are enabled. Also, try connecting the drives to different SATA ports to rule out port issues.
To enable virtualization, enter the BIOS setup by pressing the appropriate key during boot (usually Del or F2). Navigate to the Advanced tab, find the CPU configuration settings, and enable Intel Virtualization Technology (VT-x).
The Baseboard Management Controller (BMC) on the ASUS P12R-E motherboard provides remote management capabilities, including hardware monitoring, remote power control, and system event logging, using the IPMI interface.
To improve cooling, ensure that the case has adequate airflow with properly placed intake and exhaust fans. Consider using high-quality thermal paste between the CPU and cooler, and keep the system clean from dust buildup. Use the motherboard's fan control settings to optimize fan speeds.