ASUS Lyra Trio User Manual
![ASUS Lyra Trio Router manual cover](/images/RXStqVijPhgzfaerChMXCCAe/thumbs/thumb175x175.webp)
To set up your ASUS Lyra Trio, connect the primary Lyra unit to your modem via Ethernet cable, power it on, and download the ASUS Lyra app from the App Store or Google Play. Follow the in-app instructions to complete the setup process.
Ensure all cables are securely connected and reboot both your modem and Lyra unit. If the issue persists, check for firmware updates via the ASUS Lyra app and install them.
Place the Lyra units in central locations, avoiding thick walls and electronic interference. The app can help optimize placement for better coverage.
Open the ASUS Lyra app, go to settings, and select “Firmware Update”. If an update is available, follow the prompts to install it.
Yes, you can use it in Access Point mode. Set up the primary Lyra unit using the app and select the appropriate mode during configuration.
Press and hold the reset button on the back of the Lyra unit for about 10 seconds until the LED starts blinking red. Release the button and wait for the unit to restart.
Power on the new Lyra unit, open the ASUS Lyra app, and follow the instructions to add the new unit to your network.
Open the ASUS Lyra app and go to the network settings to view or reset your Wi-Fi password.
Open the ASUS Lyra app, navigate to parental controls, and follow the prompts to set up profiles and restrictions for devices.
Check for firmware updates, reduce interference by repositioning units, and ensure no devices are heavily using bandwidth. Restart the network if necessary.