ASUS H87M-PLUS User Manual
![ASUS H87M-PLUS Motherboard manual cover](/images/HddTHMUhsVcyiWpNhFAXfKiS/thumbs/thumb175x175.webp)
To update the BIOS, download the latest BIOS file from the ASUS support website, save it to a USB drive, and use the ASUS EZ Flash utility in the BIOS setup to perform the update.
Check all power connections, reseat RAM and CPU, ensure the GPU is properly installed if applicable, and clear the CMOS by removing the battery or using the jumper.
The ASUS H87M-PLUS supports Intel 4th generation Core i7, i5, i3, Pentium, and Celeron processors with the LGA 1150 socket.
Ensure RAM sticks are properly seated, try booting with one stick at a time, use the correct memory slots, and verify if the RAM is on the motherboard's QVL list.
The ASUS H87M-PLUS supports a maximum of 32GB of DDR3 RAM across its four DIMM slots.
Enter the BIOS setup by pressing the DEL key during boot, navigate to the AI Tweaker section, and enable the XMP profile for your RAM.
Check the BIOS settings to ensure USB ports are enabled, update the motherboard drivers, and inspect physical connections on the motherboard.
Refer to the motherboard manual for the front panel connector layout and connect each wire from the case accordingly, ensuring polarity is correct.
Yes, the ASUS H87M-PLUS supports RAID 0, 1, 5, and 10 configurations through its Intel Rapid Storage Technology feature.
To reset the CMOS, locate the CLR_CMOS jumper on the motherboard and short the pins or remove the CMOS battery for a few seconds and then reinsert it.