ASUS F1A55-M LE User Manual

To update the BIOS, download the latest BIOS version from the ASUS support website, extract the files to a USB drive, and reboot the system. Enter the BIOS setup by pressing 'Del' during boot, navigate to 'Tools', and select 'EZ Flash 2'. Follow the on-screen instructions to complete the update.
First, check all cable connections and ensure the RAM and CPU are properly seated. Clear the CMOS by removing the battery for a few minutes or using the CLRTC jumper. Reconnect and try booting again.
Enter the BIOS setup by pressing 'Del' during startup. Go to 'Advanced' > 'CPU Configuration' and enable 'SVM Mode' to turn on virtualization support. Save changes and exit.
The ASUS F1A55-M LE supports a maximum of 32GB of DDR3 RAM, distributed across two DIMM slots.
Check if USB ports are enabled in the BIOS under 'Advanced' > 'USB Configuration'. Update the chipset drivers from the ASUS website. If issues persist, ensure the OS is updated and try using different USB devices.
Confirm the SATA cable and power connector are securely attached. Check the BIOS to ensure the SATA port is enabled. If the drive is still not detected, try using a different SATA port or cable.
Create a bootable USB drive with Windows installation media. Boot from the USB by setting it as the primary boot device in the BIOS. Follow the on-screen instructions to install Windows, ensuring the correct drive partition is selected for the OS installation.
Enter the BIOS setup by pressing 'Del' during boot, go to 'Advanced' > 'SATA Configuration', and set 'SATA Mode' to 'RAID'. Save changes and reboot. Press 'Ctrl+F' during startup to enter the RAID configuration utility and set up your desired RAID array.
Ensure the case has adequate airflow and that all fans are operational. Clean dust from the heatsink and fans. Consider reapplying thermal paste to the CPU and installing additional case fans if necessary.
Enter the BIOS setup by pressing 'Del' during boot. Navigate to 'Exit' and select 'Load Setup Defaults' to reset the BIOS settings. Save changes and exit.