ASUS ET2325IUK User Manual
![ASUS ET2325IUK Computer manual cover](/images/NSTKNhSKHJkOhXPqKUyrLUTt/thumbs/thumb175x175.webp)
To perform a factory reset on your ASUS ET2325IUK, power off the computer. Turn it back on and repeatedly press the F9 key until you see the recovery screen. Follow the on-screen instructions to reset your computer to its factory settings.
First, ensure that the touchscreen is enabled in the Device Manager. If it is enabled and still not responding, try updating the touchscreen driver. If the problem persists, consider running a hardware diagnostic or contacting ASUS support.
Click on the network icon in the system tray, select the desired Wi-Fi network, and then click 'Connect'. Enter the network password when prompted to establish the connection.
Start by checking for any software updates and performing a disk cleanup. You can also uninstall unnecessary programs and run a virus scan. Increasing RAM or upgrading to an SSD can also improve performance.
Download the latest BIOS update from the ASUS support website. Extract the files and run the BIOS update utility. Follow the on-screen instructions to complete the update process.
Check if the volume is muted or turned down low. Ensure the correct playback device is selected in the sound settings. If the issue persists, update the audio drivers through the Device Manager.
You can expand storage by using external storage devices such as USB drives or external hard drives. Alternatively, consider replacing the existing hard drive with a higher capacity one, or adding an additional internal drive if the model supports it.
First, check the power cable and ensure it is securely connected. Try a different power outlet or cable, if available. If the problem persists, it may require professional service to check for hardware issues.
Use a microfiber cloth slightly dampened with water or a screen cleaning solution. Gently wipe the screen and body. Avoid using harsh chemicals or abrasive materials that could damage the surface.
Open the Control Panel and navigate to 'Hardware and Sound'. Click on 'Pen and Touch' and configure the multi-touch gestures under the 'Touch' tab to your preference. Ensure your drivers are up to date for full functionality.