ASUS BE24ECSNK User Manual
![ASUS BE24ECSNK Monitor manual cover](/images/kRHOoyLwoYMvethrGenflwGh/thumbs/thumb175x175.webp)
To adjust the color settings, press the Menu button on the monitor. Navigate to the 'Color' section using the arrow buttons, and you can adjust settings like Brightness, Contrast, and Color Temperature to your preference.
First, ensure that all cables are securely connected. Check if the monitor is turned on and verify that the input source is correctly selected. If the issue persists, try connecting the monitor to another device to rule out a problem with the original device.
The built-in webcam can be enabled by connecting the USB cable from the monitor to your computer. Ensure that the necessary drivers are installed, which should happen automatically on most systems. Use any video application to access the webcam.
Flickering can be caused by a loose cable, incorrect refresh rate settings, or outdated graphics drivers. Ensure all cables are firmly connected, set the refresh rate to the recommended setting in your display settings, and update your graphics drivers.
Yes, the ASUS BE24ECSNK is compatible with VESA mounts. It supports a 100x100 mm VESA mount pattern. Ensure you have the appropriate mounting hardware for your setup.
To perform a factory reset, press the Menu button, navigate to the 'Setup' menu, then select 'Reset'. Confirm the action to restore all settings to their default values.
Use a soft, lint-free microfiber cloth slightly dampened with water or a non-alcoholic screen cleaner. Gently wipe the screen in a circular motion. Avoid using paper towels or rough materials that can scratch the screen.
No, the ASUS BE24ECSNK does not support daisy chaining as it lacks a DisplayPort Out port, which is necessary for this feature.
The ASUS BE24ECSNK monitor stand allows for height adjustment and tilt. To adjust the height, hold the top and bottom of the monitor and gently pull up or push down. To tilt, hold the top and bottom edges and adjust to your desired angle.
Ghosting can be reduced by adjusting the monitor’s Overdrive settings. Press the Menu button, go to the 'Image' section, and adjust the Overdrive setting to 'Normal' or 'Extreme' based on your preference.