AGA H30 Illustrated Erection Instructions

To ignite the burners, ensure the cooker is connected to a power source. Turn the corresponding burner control knob to the 'ignite' position and hold until the flame is established. Release the knob and adjust to the desired heat level.
Check that the cooker is properly plugged in and that the circuit breaker has not tripped. Ensure the temperature setting is correct and the door is fully closed. If the issue persists, contact a qualified technician for further diagnosis.
Use a damp cloth with mild detergent for routine cleaning. Avoid abrasive cleaners or scouring pads, as they can damage the enamel finish. For stubborn stains, apply a specialized enamel cleaner following the manufacturer's instructions.
Regularly clean the cooker, check for gas leaks, and ensure all knobs and controls are functioning correctly. Schedule an annual maintenance check with a certified technician to ensure all components are in good working order.
Press the 'Timer' button until the current time appears. Use the '+' and '-' buttons to adjust the hour and minutes. Press 'Set' to save the new time. Ensure the timer is not set to auto mode if you wish to manually control cooking times.
Yes, cast iron cookware can be used on the ceramic hob. However, ensure the base is smooth to avoid scratching the surface. Lift the cookware instead of sliding it to prevent damage to the hob.
Check for any blockages in the burner holes and clean them if necessary. Ensure the gas regulator is set correctly and that the gas supply is adequate. Persistent issues may require professional adjustment of the air-to-gas ratio.
Allow the oven to cool completely before cleaning. Use a soft cloth with a mild detergent solution to wipe the glass. Avoid using sharp objects or harsh chemicals that can scratch or weaken the glass.
If you smell gas, immediately turn off all burners and the main gas supply. Open windows to ventilate the area and do not use electrical appliances. Contact a qualified gas engineer to inspect and resolve the issue.
Use an oven thermometer to check the actual temperature inside the oven. If there's a discrepancy, consult the user manual to adjust the thermostat calibration, or seek assistance from a professional technician.