Vedette VFV4800WK User Manual
![Vedette VFV4800WK Refrigerator manual cover](/images/RGcyvCvpxWhsNIAQEgpbaOmY/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the arrow buttons to set your desired temperature for both the fridge and freezer sections.
First, check if the refrigerator is plugged in and the power is on. Ensure that the temperature settings are correct. Clean the condenser coils and check that the door seals are intact. If the issue persists, contact a technician.
The Vedette VFV4800WK is a frost-free model, so manual defrosting is not required. However, if you notice excessive frost buildup, ensure the door is closing properly and check the door seals for damage.
To clean the interior, first unplug the refrigerator. Remove all food items and detachable shelves. Use a mixture of mild detergent and warm water to wipe down the interior surfaces, then dry with a clean cloth.
Water pooling can be due to a blocked defrost drain. Unplug the refrigerator, locate the drain at the back of the fridge, and clear any obstructions using a pipe cleaner or similar tool.
To replace the light bulb, unplug the refrigerator and remove the cover over the light. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the cover before plugging the refrigerator back in.
Check if the refrigerator is level and that it is not touching any walls or cabinets. Ensure that the items inside are not vibrating against each other. If the noise persists, contact customer support for assistance.
Ensure the refrigerator is not placed near heat sources such as ovens or direct sunlight. Keep the door closed as much as possible and ensure that the door seals are airtight. Regularly clean the condenser coils to improve efficiency.
The Vedette VFV4800WK Refrigerator uses R600a refrigerant, which is environmentally friendly and efficient.
To reset the control panel, unplug the refrigerator for about 5 minutes and then plug it back in. This should reset the electronics and clear minor glitches.