Configure the Router
FAQ (Frequently Asked Questions)
Enter http://tplinkwifi.net or http://192.168.0.1 in the address bar of the web browser. Enter admin for both username and password, and then click Login. Note: If the login window does not appear, please refer to FAQ > Q1.
Connect your computer to the router (Wired or Wireless) Either use the default or customize your wireless settings, and click Next.
Click Finish to complete the Quick Setup.
Note: If you change the default SSID and password, write down the new wireless settings.
Q2. What can I do if I cannot access the Internet? Check if the Internet is working properly by connecting a computer directly to the modem via Ethernet cable. If not, contact your Internet Service Provider. Open a web browser, enter http://tplinkwifi.net or http://192.168.0.1 and run the setup again. Reboot your router and try again.
Note: For cable modem users, reboot the modem first. If the problem still exists, log in to the Web Management page of the router, and go to Network > MAC Clone, click Clone MAC Address and then click Save.
Q3. How do I restore the router to its factory default settings? While the router is powered on, press and hold the WPS/RESET button on the rear panel of the router for approximately 8 seconds. Log in to the Web Management page of the router, and go to System tools > Factory Defaults, click Restore, and then wait until the p rogress bar is finished.
Q4. What can I do if I forget my web management page password? Refer to FAQ > Q3 to reset the router, and then use the default admin (all ilowercase) for both username and password to log in.
Q5. What can I do if I forget my wireless network password? If you have not changed the default Wireless Password, it can be found on the product label of the router. If you have changed your password, log in to the routers Web Management page, go to Wireless > Wireless Security to obtain or reset your password.
Note: If your questions are not answered here, please refer to http://www.tp-link.com/en/support/faq and click Contact Technical Support for further assistance.
1.
Configure the router using a web browser 2.
Congratulations! The basic internet and wireless settings are finished, please click Finish button and test your internet connection. If it is failed, please reboot your modem and wait 2 minutes or run the Quick Setup again.
Quick Setup - Finish
FinishBack
A
C
D
B
Quick Setup - Wireless
Wireless Network Name(SSID): TP-LINK_7AFF
Wireless Security:
XXXXXXXX
Disable Security
WPA-PSK/WPA2-PSK
No Change
(You can enter ASCII characters between 8 and 63 or Hexadecimal characters between 8 and 64.)
NextBack
Login
admin
admin
Copyright 2016 TP-LINK Technologies Co., Ltd. All rights reserved.
http://tplinkwifi.net
Wired
Wireless Connect wirelessly by using the SSID (Network Name) and Wireless Password/PIN printed on the product label at the bottom of the router.
Ethernet cable ON/OFF POWER WAN 1 2 3 4
WPS/ RESET
WIFI ON/OFF
Next
Auto-Detect Dynamic IP (Most Common Cases) Static IP PPPoE/Russian PPPoE L2TP/Russian L2TP PPTP/Russian PPTP
Note: For users in some areas (such as Russia, Ukraine etc.), please contact your ISP to choose connection type manually.
Back
Quick Setup - WAN Connection Type
Configure via Tether App TP-LINK's Tether app lets you conveniently access the router and:
View information about the clients on your network.
Block network access from specific users or devices.
Set up Parental Control with access time and content restrictions.
Change the basic wireless network settings easily.
Scan the QR code to download the TP-LINK Tether app from the Apple App Store or Google Play.
1
2
3
Ensure your smart device is wirelessly connected to the home network.
Launch the Tether app and start managing your home network.
How to start?
2016 TP-LINK
Turn off Wi-Fi on your computer and connect the devices as shown below.
Click Quick Setup on the left menu, and click Next. Select your WAN Connection Type. If you are unsure of your connection type, select Auto-Dectect. Click Next and follow the onscreen instructions.
Q1. What can I do if the login window does not appear? If the computer is set to a static or fixed IP address, change the
en
en