LED Explanation
LED Status Indication (For Range Extender Mode)
The extender is connected or not connected to the 5GHz wireless network of your router.5GHz
The extender is connected or not connected to the 2.4GHz wireless network of your router.2.4GHz
progress. Power
Blinking
The extender is connected to your routers wireless network and is in a suitable location. The extender is receiving a weak signal. Try relocating it closer to your router. WPS connection is in progress. No wireless connection is established.
Signal
Solid blue
Solid red
Blinking
Method 2: Via a Web Browser
Method 1: Via the Tether App
1. Connect your computer or smartphone to the extenders network. If you are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
3. Manage the extender as needed.
1. Connect your smartphone to the extenders or routers network. 2. Launch the Tether app, select your extender, and log in. 3. Manage the extender as needed.
Manage the Extender After setup, you can manage the extender via any of the methods below. Note: If your extender and router use the same network name, Method 1 is recommended.
network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMeshs seamless coverage.
OneMeshTM with Seamless Roaming
Seamless Roaming Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.
Router and extenders share the same wireless settings, including network name, password, access control settings and more.
Easy Setup and Management Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your routers web management page.
To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility
Wi-Fi
Wi-Fi
TP-Link_Extender CHOOSE A NETWORK...
Other...
< Settings
My Devices
Local Device
RExxx XX-XX-XX-XX-XX-XX
Q1. What should I do if the Tether app cannot find my device during setup? Try another method by following the steps below: 1. Connect your smartphone to the extenders network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.
Q2. What should I do if the Signal LED doesnt turn solid on after completing setup via the Tether app or web browser? You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again. Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances. If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration. Try setting it up via the WPS button. Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender? With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.
Tip: If you have connected to the extenders Wi-Fi but still cannot find your device, try turning off your cellular data.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs for our product guides, you are welcome to email [email protected].
To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.
Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use the device where wireless devices are not allowed. The socket-outlet shall be installed near the equipment and shall be easily accessible. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur d
en
en