tp-link Archer AX20 V1.20 Quick Installation Guide

Power on the modem, and then wait about 2 minutes for it to restart.

2

Set Up the Network

1. Connect your device to the router wirelessly or with an Ethernet cable.

New Password:

Lets Get Started

Confirm Password:

http://tplinkwifi.net

Method TWO: Via a Web Browser

2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in.

3. Follow the step-by-step instructions to set up the internet connection and register for the TP-Link Cloud service.

Note: If the login window does not appear, please refer to Q1 of Need Help? in this guide.

Set up with videos: Scan QR code or visit https://www.tp-link.com/support/setup-video/#wi-fi-routers

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

Scan for Tether Tether

or

Choose your device type

Archer AX11000 Archer C5400X

Range Extender

Router

Archer AX6000

2. Open the Tether app and log in with your TP-Link ID.

3. Tap the button in the Tether app and select Router > Wireless Router. Follow the steps to complete the setup and connect to the internet.

Note: If you dont have an account, create one first.

The default wireless network names (SSIDs) and password are printed on the label at the bottom of the router.

Model: Archer AX3000 AX3000 Gigabit Wi-Fi Router

Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G

2

Connect the power adapter to the router and turn on the router.

3

Connect the Hardware

Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more than 2 seconds. Both the LEDs should turn solid on.

Power On

Internet On

2.4GHz On

5GHz On

If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the routers WAN port, and then follow steps 3 and 4 to complete the hardware connection. *Image may differ from actual product.

Unplug the power to turn off your modem, if any, and remove the backup battery if it has one. Place the router horizontally and orient the antennas vertically.

Modem

Unplug the power

Verify that the hardware connection is correct by checking the following LEDs. 4

1

Internet

1 Connect the powered-off modem to the routers WAN port with an Ethernet cable.

Q1. What should I do if I cant access the web management page? Reboot your router and try again. If the computer is set to a static IP, change its settings to obtain an IP address automatically. Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web browser. Use another web browser and try again. Disable and enable the network adapter in use.

Q2. What should I do if I cant access the internet? Reboot your modem and router, then try again. Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet service provider. Log in to the web management page of the router, and go to the Network Map page to check whether the internet IP address is valid or not. If it is, go to Advanced > Quick Setup to set up again; otherwise, check the hardware connection. For cable modem users, log in to the web management page of the router and go to Advanced > Network > Internet > MAC Clone. Select Clone Current Device MAC and click SAVE. Then reboot both the modem and the router.

Q3. What should I do if I forget my wireless password? If you have not changed the default wireless password, it can be found on the label at the bottom of the router. Connect a computer directly to the router using an Ethernet cable. Log in to the routers web management page at http://tplinkwifi.net, and go to the Wireless page to retrieve or reset your wireless password.

Q4. What should I do if I forget my web management page password? If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it. Alternatively, press and hold the Reset button on the back until the Power LED blinks. Then visit http://tplinkwifi.net to create a new login password.

2020 TP-Link 7106508717 REV1.0.3

Need Help?Button Explanation

Press and hold the button for more than 2 seconds to turn on or off the wireless function of your router.

WPS/Wi-Fi Button Press the button for 1 second, and immediately press the WPS button on your client to start the WPS process.

LED Button Press the button for 1 second to turn on or off the LEDs of your router.

Reset Button Press and hold the button until the Power LED blinks to reset the router to its factory default settings.

USB Applications With the USB port, its easy to share files and media with multiple devices. Visit https://www.tp-link.com/app/usb to learn more about the USB applications.

Remote Access Access the USB drive when you are away from home

Local Storage Sharing Share files from the USB drive with devices on your home network

Media Server Play media from the USB drive on your computer and smart devices

AX1800 Wi-Fi 6 Router

Quick Installation Guide

Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use any other chargers than those recommended. Do not use damaged charger or USB cable to charge