Stoves SDW60 Instruction Manual
![Stoves SDW60 manual cover](/images/xIyWSoovKnARkEJJBosVzBfH/thumbs/thumb175x175.webp)
Ensure that large items do not block the spray arms. Place items such as pots and pans at the bottom rack, and ensure they do not obstruct the detergent dispenser. Delicate glassware and small items should go on the top rack.
Check if the dishwasher is plugged in and the door is securely closed. Ensure that the water supply is turned on and the circuit breaker is not tripped.
Remove the bottom rack to access the filters. Twist the cylindrical filter to unlock and remove it. Rinse all filters under running water and use a soft brush if necessary. Reassemble in reverse order.
Ensure the rinse aid dispenser is filled, as it helps with the drying process. Also, check that the selected wash program includes a drying phase. Load dishes to allow proper air circulation.
Inspect the door gasket for damage and ensure it's clean. Check for overfilling by ensuring the water inlet valve is functioning correctly. Verify that the dishwasher is level and not tilted.
Descale every 1-2 months using a dishwasher-safe descaling agent. Run an empty cycle with the descaler according to the product instructions to remove limescale buildup.
The E4 error code indicates a water overflow issue. Check for blockages in the filter and drain hose. Ensure the water inlet valve is not stuck open.
Routinely clean the spray arms and filters to prevent clogs. Use the recommended amount of detergent and ensure the water temperature is at least 120°F (49°C).
To reset, turn off the dishwasher, wait a few minutes, and then turn it back on. Alternatively, refer to the user manual for specific reset instructions.
Regularly clean the filters, check and clean the spray arms, inspect the door seals, and ensure the rinse aid and salt dispensers are filled. Run an empty cycle with a dishwasher cleaner monthly.