Sena Outrush R User Guide
![Sena Outrush R manual cover](/images/5e0f1513103dc34931d9b222/thumbs/thumb175x175.webp)
To pair your Sena Outrush R with your smartphone, turn on the Bluetooth on your smartphone, then press and hold the Phone Button on the Outrush R until you hear the voice prompt say "Phone pairing". On your smartphone, search for Bluetooth devices and select "Sena Outrush R" from the list.
The Sena Outrush R offers up to 15 hours of talk time on a single charge.
To perform a factory reset on your Sena Outrush R, press and hold the Jog Dial and the Phone Button together for about 10 seconds until the LED flashes red. This will restore the device to factory settings.
To update the firmware on your Sena Outrush R, download the Sena Device Manager from the Sena website, connect your helmet to your computer using a USB cable, and follow the instructions in the device manager to update the firmware.
If your Sena Outrush R is not charging, ensure that the USB cable is properly connected to both the helmet and a power source. Check for any debris in the charging port and try using a different cable or power source. If the issue persists, contact Sena support.
Yes, the Sena Outrush R supports multipoint technology, allowing you to connect to two Bluetooth devices simultaneously, such as a smartphone and a GPS device.
To start a group intercom conversation, press the Jog Dial to enter intercom pairing mode, then press the Jog Dial again to connect with other paired devices. Repeat the process to add more participants.
To adjust the volume on the Sena Outrush R, rotate the Jog Dial clockwise to increase the volume and counterclockwise to decrease it during a call or while listening to music.
The Sena Outrush R has an intercom range of up to 800 meters (0.5 miles) in open terrain.
When the Sena Outrush R is fully charged, the LED indicator will turn solid blue.