Sena Mesh Quick Start Guide

To pair your Sena Mesh with another device, first ensure both devices are in pairing mode. For the Sena Mesh, press the Mesh Intercom Button for 6 seconds until you hear "Mesh Intercom pairing." On the other device, follow its manufacturer's instructions to complete the pairing process.
First, ensure that all devices are within range and in Mesh Intercom mode. If the issue persists, reset the mesh network by pressing the Mesh Intercom Button for 8 seconds. If necessary, restart all devices and try connecting again.
To update the firmware, download the Sena Device Manager from the Sena website. Connect your device to the computer via USB, open the Device Manager, and follow the on-screen instructions to complete the firmware update.
Rapid battery drain can be due to high usage of features like Mesh Intercom, GPS, or music streaming. Ensure all non-essential features are turned off when not in use, and check for any firmware updates that might address battery performance issues.
To perform a factory reset, press and hold the Phone Button for 12 seconds until you hear the voice prompt, "Factory reset." Release the button, and the device will reset to factory settings.
Yes, you can use the Sena Mesh with a non-Sena headset by pairing them via Bluetooth. Ensure both devices are in pairing mode and follow the pairing instructions for each device.
To add a new member, have the new device enter Mesh Intercom pairing mode by pressing the Mesh Intercom Button for 6 seconds. On one device already in the network, press their Mesh Intercom Button once to connect.
Poor audio quality can result from interference or low battery. Ensure all devices are fully charged and within range. Move away from potential sources of interference, such as power lines or large metal structures.
To connect to a GPS device, put the Sena Mesh into Bluetooth pairing mode by holding the Phone Button for 5 seconds. Then, follow the GPS device's instructions to search for and connect to the Sena device.
Yes, the Sena Mesh can operate in both Bluetooth and Mesh Intercom modes simultaneously. This allows you to communicate over the mesh network while still being connected to a Bluetooth device such as a smartphone or GPS.