Sandstrom SWC6B13E Instruction Manual
![Sandstrom SWC6B13E manual cover](/images/twpsdWDoWrlsuZmzQwpFnaUc/thumbs/thumb175x175.webp)
To adjust the temperature settings, use the control panel located inside the wine cellar. Press the up or down arrow buttons to set your desired temperature.
Ensure that the wine cellar is plugged in and the power is on. Check that the door is sealed properly and not opened frequently. Also, make sure the temperature setting is correct and that the vents are not blocked.
The wine cellar is equipped with an automatic defrost system. However, if manual defrosting is needed, unplug the unit and leave the door open until the frost melts.
To clean the interior, unplug the wine cellar and remove all bottles. Use a soft cloth and a mild detergent solution to wipe down the surfaces. Rinse with a clean damp cloth and dry thoroughly before plugging back in.
After a power outage, the wine cellar should resume operating automatically. If not, check the power supply, and ensure the control panel settings are correctly configured.
Unusual noises may result from the unit not being level. Check and adjust the feet of the wine cellar. Also, ensure that bottles are not touching each other or the interior walls.
Check and clean the air filter every 3 to 6 months to ensure optimal performance. Remove the filter, wash it with warm soapy water, rinse, and allow it to dry completely before reinstalling.
Yes, you can store other beverages, but it is optimized for wine storage. Ensure that the temperature setting is appropriate for the type of beverage you are storing.
The recommended humidity level for wine storage is between 50% and 80%. This helps to prevent corks from drying out and maintain the quality of the wine.
To increase energy efficiency, ensure the door is properly sealed and not left open. Keep the unit away from direct sunlight and heat sources. Regularly clean the condenser coils to ensure efficient operation.