Sandstrom SWC32B11E Instruction Manual
![Sandstrom SWC32B11E manual cover](/images/PBaFrwTgOgBJqWIGZXvEMHwi/thumbs/thumb175x175.webp)
To set the temperature, use the control panel located inside the wine cellar. Press the 'Set' button, then use the '+' and '-' buttons to adjust to your desired temperature. Confirm the setting by pressing the 'Set' button again.
Ensure that the wine cellar is plugged in and the power is on. Check for any obstructions blocking the vents and ensure the door seals tightly. Also, verify that the temperature setting is correct. If problems persist, consult the user manual or contact customer support.
Clean the wine cellar every 3-4 months. Use a soft cloth and mild detergent to clean the interior and exterior. Avoid using abrasive cleaners or solvents that may damage the surfaces.
Yes, the Sandstrom SWC32B11E Wine Cellar is suitable for storing both red and white wine. For optimal storage, set the temperature to a compromise between the ideal temperatures for red (12-19°C) and white wine (8-12°C).
The energy consumption details are specified in the product manual. Generally, wine cellars are designed to be energy efficient, but for precise values, refer to the technical specifications section of the manual.
The Sandstrom SWC32B11E Wine Cellar features an automatic defrost system. However, if manual defrosting is needed, turn off the unit, remove all contents, and leave the door open until the ice melts. Clean and dry the interior before restarting the unit.
Check if the wine cellar is level and ensure it is not touching the wall or other objects. Some noise is normal due to the compressor operation, but if the noise is excessive, contact customer service for assistance.
Place the wine cellar in a cool, well-ventilated area away from direct sunlight or heat sources. Ensure that the door seals properly and avoid frequent opening to maintain the internal temperature.
The Sandstrom SWC32B11E Wine Cellar can typically hold up to 32 standard 750ml wine bottles. The actual capacity may vary depending on bottle size and shape.
To replace the interior light, first, unplug the wine cellar. Remove the light cover by unscrewing it, then replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the unit back in.