Sandstrom SUL60W13E Instruction Manual
![Sandstrom SUL60W13E manual cover](/images/gIvUyykpWSuiwJWFyhlgTCoR/thumbs/thumb175x175.webp)
To adjust the temperature, locate the thermostat dial inside the larder. Turn it clockwise to lower the temperature and counterclockwise to increase it. The ideal setting is usually in the middle range.
Ensure the larder is plugged in and the thermostat is set correctly. Check for any obstructions in the vent. If the issue persists, consider defrosting the unit and cleaning the coils.
The larder should be defrosted approximately every 6 months, or when the frost build-up exceeds 0.25 inches.
No, the Sandstrom SUL60W13E Larder is designed for fresh food storage only. It does not have a freezer compartment for storing frozen foods.
Unplug the larder and remove all contents. Use a mild detergent and warm water to clean the interior surfaces. Rinse with clean water and dry thoroughly before plugging it back in.
Ensure the larder is level and not touching any walls or furniture. Check for loose items inside that may be vibrating. If noises persist, contact a qualified technician.
Keep the larder away from heat sources and ensure there is adequate ventilation around it. Avoid opening the door frequently and ensure the seal is intact.
The recommended storage temperature is between 37°F (3°C) and 41°F (5°C) to ensure food safety and freshness.
First, unplug the larder. Remove the light cover by unscrewing it or gently pulling it off. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
This may be due to a blocked defrost drain. Check and clean the drain hole inside the larder to ensure proper drainage.