Sandstrom STVBTS13 Instruction Manual

To mount the Sandstrom STVBTS13 securely, ensure you have the correct wall anchors suitable for your wall type. Use a stud finder to locate studs if mounting on drywall. Follow the mounting template provided in the package, drill appropriate holes, and attach the bracket using the screws provided. Ensure it is level before tightening fully.
If the mount is loose, first check that all screws are tightened. Ensure the wall anchors are appropriate for your wall type and are not damaged. Recheck the alignment using a level. If issues persist, consider consulting a professional installer.
Yes, the Sandstrom STVBTS13 mount can handle most curved TVs. Verify the VESA pattern compatibility and weight limit of the mount against your TV's specifications.
To adjust the tilt angle, gently hold the TV from the sides and tilt it to the desired angle. Use the mount's adjustment screws to lock the angle in place. Always support the TV while making adjustments to prevent damage.
Regularly check that all screws and bolts are tight. Inspect for any signs of wear or damage in the mount structure. Clean dust and debris from the mount to ensure smooth movement and operation.
The Sandstrom STVBTS13 mount has a maximum weight capacity of 40 kg (88 lbs). Ensure your TV does not exceed this limit for safe mounting.
To remove the TV, first disconnect all cables. Support the TV while unscrewing the safety bolts or fasteners on the mount. Carefully lift the TV off the mount, ensuring you have a stable surface to place it on.
Yes, you can install the mount on a brick wall. Use appropriate masonry drill bits and wall anchors designed for brick to ensure a secure installation.
If the tilting mechanism is too stiff, slightly loosen the adjustment screws. If it's too loose, tighten them until the desired resistance is achieved. Ensure adjustments are made gradually to avoid damage.
Yes, the Sandstrom STVBTS13 mount is compatible with VESA 400x400 TV mounting patterns. Ensure your TV fits within the weight and size specifications of the mount.