Sandstrom SKET411 Instruction Manual

To descale your Sandstrom SKET411 Kettle, fill the kettle with equal parts of water and white vinegar. Boil the mixture, then let it sit for 15-20 minutes. Rinse thoroughly with fresh water before using.
Check if the kettle is properly connected to the power supply. Ensure that the power switch is in the "on" position and that the kettle is seated correctly on its base. If the problem persists, inspect the power cord for damage.
To clean the exterior, unplug the kettle and let it cool completely. Wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or scouring pads to prevent scratching the surface.
It is not recommended to boil milk in the Sandstrom SKET411 Kettle as it may cause damage and is difficult to clean. The kettle is designed for boiling water only.
Unusual noises can be due to scale buildup. Try descaling the kettle using a mixture of water and vinegar. If the noise persists, ensure the kettle is placed on a flat, stable surface.
To change the filter, first unplug the kettle and let it cool. Open the lid and remove the old filter by pulling it gently. Insert the new filter by placing it in the designated slot and ensure it is secure.
The maximum water capacity of the Sandstrom SKET411 Kettle is 1.7 liters. Ensure not to overfill past the maximum mark to prevent overflow while boiling.
Ensure the lid is properly closed, and the kettle is seated correctly on the base. If the problem persists, it may indicate a thermostat issue, and you should contact customer support.
The Sandstrom SKET411 Kettle features a cordless design for easy pouring and maneuverability. The kettle detaches from its base for cordless convenience.
To maintain energy efficiency, only boil the amount of water you need and regularly descale the kettle to prevent limescale buildup, which can affect heating efficiency.