Sandstrom SKET211 Instruction Manual
![Sandstrom SKET211 manual cover](/images/IDxlebmXHqouPmjHYMdpWVJW/thumbs/thumb175x175.webp)
To descale your Sandstrom SKET211 Kettle, fill it with a mixture of equal parts water and white vinegar up to the maximum fill line. Boil the solution and leave it to stand for 30 minutes. Rinse thoroughly with fresh water before using again.
First, ensure the kettle is properly connected to a functioning power outlet. Check if the power switch is engaged. If the kettle still doesn't turn on, inspect the plug and power cord for damage, and consult the user manual for further troubleshooting steps.
No, the Sandstrom SKET211 Kettle is designed specifically for boiling water. Using it to boil other liquids can damage the kettle and void the warranty.
To clean the exterior of the Sandstrom SKET211 Kettle, unplug it and let it cool. Wipe with a damp cloth and mild detergent, then dry with a soft towel. Avoid abrasive cleaners or scouring pads to prevent surface damage.
Unusual noises can be due to mineral buildup inside the kettle. Descale the kettle regularly to prevent this. If the noise persists, ensure the kettle is placed on a flat surface and not overfilled.
While it's generally safe to leave water in the kettle overnight, it's recommended to empty it after use to prevent mineral buildup and ensure fresh-tasting water.
Ensure the kettle is clean and dry before storing. Wrap the cord around the base and place it in a cool, dry place. Avoid storing in a damp environment to prevent corrosion.
Ensure the water level does not exceed the maximum fill line, and always position the lid securely before boiling. The automatic shut-off feature should activate when the water reaches boiling point.
A slight plastic smell is normal when the kettle is new. Fill it with water, boil, and discard the water. Repeat this process several times to eliminate any residual odors.
The Sandstrom SKET211 Kettle is designed for specific voltage use. Using it in a country with a different voltage requires a suitable adapter or transformer. Check the specifications to ensure compatibility.