Sandstrom SJUTBL14E Instruction Manual
![Sandstrom SJUTBL14E manual cover](/images/CUmATKfZxUVJYynMxQzitmWE/thumbs/thumb175x175.webp)
To set the time on the Sandstrom SJUTBL14E Clock, press and hold the 'Time Set' button until the display begins to flash. Use the '+' or '-' buttons to adjust the hour and minute. Press 'Time Set' again to confirm.
Ensure the clock is properly set by following the time-setting instructions. Check for power interruptions or dead backup batteries, which could cause the clock to reset.
Press the 'Alarm Set' button and hold it until the alarm time flashes. Use the '+' or '-' buttons to adjust the alarm hour and minute. Press 'Alarm Set' again to confirm the alarm time.
Verify that the alarm is enabled by checking the alarm icon on the display. Ensure the alarm volume is set to an audible level. Check for any power issues that may have reset the clock.
To switch time formats, press and hold the 'Mode' button until the time format begins to flash. Use the '+' button to toggle between 12-hour and 24-hour formats. Press 'Mode' again to confirm your selection.
To adjust the display brightness, press the 'Dimmer' button repeatedly until the desired brightness level is reached. There are multiple brightness settings to choose from.
To reset the clock to factory settings, locate the reset button on the back or bottom of the clock. Press and hold this button with a thin object for a few seconds until the display clears.
The battery backup ensures that the clock retains the time and alarm settings during a power outage. Replace the batteries periodically to maintain this feature.
To temporarily silence the alarm, press the 'Snooze' button. This will pause the alarm for a set duration, after which it will sound again.
The Sandstrom SJUTBL14E Clock typically supports one alarm setting. Refer to the user manual for details on advanced features, if available.