Sandstrom SJUGOBL15E Juice Go Instruction Manual

To set up the Sandstrom SJUGOBL15E, plug it into a power source, turn it on using the power button, and follow the on-screen instructions to set the time and date.
Check if the power cable is properly connected and ensure the outlet is working. Try resetting the radio by unplugging it for a few minutes and then plugging it back in.
To improve reception, extend the antenna fully and reposition the radio near a window or away from electronic devices that might cause interference.
Use a soft, dry cloth to clean the exterior of the radio. Avoid using water or cleaning agents directly on the device. Keep it in a dry place to prevent moisture damage.
Yes, you can connect your smartphone via Bluetooth by enabling Bluetooth on both devices and selecting the radio from the list of available devices on your smartphone.
Ensure both devices have Bluetooth turned on and are in close proximity. Try restarting both devices and reattempt pairing. Make sure no other devices are interfering with the connection.
Press the 'Alarm' button, use the 'Set' button to choose the time, and confirm the settings by pressing 'Enter'. Ensure the alarm is activated by checking the display for the alarm icon.
Check the volume settings and ensure they are not too high. Try adjusting the equalizer settings if available, and make sure the speakers are not obstructed by any objects.
To perform a factory reset, go to the settings menu, select 'Reset' or 'Factory Reset', and confirm your choice. This will erase all stored settings and return the device to its original state.
Check the user manual or the manufacturer's website for any available firmware updates. If an update is available, follow the provided instructions to download and install the update.