Sandstrom SID60W12N Instruction Manual
![Sandstrom SID60W12N manual cover](/images/JMLdieAdkbLyRtjPyQbCdxnd/thumbs/thumb175x175.webp)
To reset the Sandstrom SID60W12N dishwasher, first ensure the dishwasher is turned off. Then, disconnect it from the power source by unplugging it or switching off the circuit breaker. Wait for about 5 minutes before reconnecting it and turning it back on.
If the dishwasher is not draining properly, check for blockages in the drain hose, filter, or pump. Ensure the drain hose is not kinked and is properly connected. Clean the filter and pump area to remove any debris.
It is recommended to clean the filter in your Sandstrom dishwasher once a month. Regular cleaning helps maintain optimal performance and prevents blockages.
Use a high-quality dishwasher detergent that is compatible with your water type (hard or soft). Both powder and tablet forms are effective, but ensure they are designed for automatic dishwashers.
To improve drying performance, ensure that the rinse aid reservoir is filled. Adjust the rinse aid setting if necessary, and make sure dishes are not blocking the spray arms. Use a heated drying cycle if available.
Error code E4 on the Sandstrom dishwasher indicates a water overflow issue. Check for any blockages in the drain, ensure the dishwasher is level, and inspect the inlet valve for any malfunctions.
A white residue on dishes is often caused by hard water. To address this, use a high-quality detergent, ensure the rinse aid is filled, and consider using a water softener if necessary.
To clean the spray arms, remove them from the dishwasher and rinse them under warm water. Use a toothpick or small brush to clear any blocked holes. Reinstall the spray arms securely before using the dishwasher again.
Regular maintenance for the dishwasher includes cleaning the filter, spray arms, and door seals. Check and clean the drain hose and pump periodically. Also, run a dishwasher cleaner through a cycle every few months.
If the dishwasher door is not closing properly, check for obstructions in the door seal or latch area. Ensure that racks are properly aligned and not overloaded. Adjust the door latch if necessary.