Sandstrom SFSDAB17 Instruction Manual
![Sandstrom SFSDAB17 manual cover](/images/JtDOJHAZsGSEbErBSvqhitIC/thumbs/thumb175x175.webp)
To set up your Sandstrom SFSDAB17 Radio, plug it into a power source, extend the antenna fully, and turn it on. Use the mode button to select DAB or FM and allow the radio to scan and store available stations automatically.
Firstly, check if the radio is properly plugged into a power source and that the socket is operational. If using batteries, ensure they are inserted correctly and have sufficient charge. If the problem persists, reset the radio by unplugging it for a few minutes and then try again.
To improve reception, fully extend the antenna and position the radio near a window or away from electronic devices that may cause interference. Additionally, ensure the radio is set to the correct mode (DAB/FM) for the best reception.
To perform a factory reset, press and hold the 'Menu' button until the menu appears, navigate to 'System Settings', select 'Factory Reset', and confirm the action. This will restore the radio to its original settings.
To set the alarm, press the 'Menu' button, navigate to 'Alarm' settings, and use the tuning controls to set the desired time and alarm sound. Confirm your settings to activate the alarm.
Ensure the volume is turned up and not muted. Check if headphones are inserted as this will disable the speakers. Also, confirm that the radio is tuned to a station with a strong signal.
To switch between DAB and FM modes, press the 'Mode' button on the radio until the desired band is displayed. The radio will then switch to the selected mode.
Yes, you can preset your favorite stations. Tune in to the desired station, press and hold the 'Preset' button, and select the preset number you wish to assign the station to. Confirm to save the preset.
To adjust the sleep timer, press the 'Menu' button, navigate to 'Sleep Timer', and select the desired time duration. Confirm your selection to activate the sleep timer.
Regularly clean the radio with a soft, dry cloth to remove dust. Ensure the antenna is kept clean and extended when in use. Periodically check battery contacts if using battery power, and replace batteries as needed.