Sandstrom SFMGL18 Instruction Manual

To install the Sandstrom SFMGL18 Mount on drywall, use the included drywall anchors. First, mark the drilling points using the mount's template. Drill holes and insert the anchors, then attach the mount using screws. Ensure it's secure before mounting your device.
The Sandstrom SFMGL18 Mount can support a maximum weight of 30 kg (66 lbs). Ensure your device does not exceed this limit to avoid damage or injury.
Yes, the Sandstrom SFMGL18 Mount allows for swivel adjustments. You can swivel the TV left or right to achieve the desired viewing angle.
If your mounted TV is not level, check that all mounting screws are tightened evenly. Use a spirit level to adjust the mount as needed. Loosen the screws slightly, adjust, and retighten to level the TV.
You will need a drill, a Phillips screwdriver, a spirit level, a measuring tape, and a pencil for marking drill points to install the Sandstrom SFMGL18 Mount.
Yes, you can mount the Sandstrom SFMGL18 on a brick wall. Use masonry anchors and a hammer drill to secure the mount properly. Ensure the mount is firmly attached to prevent any movement.
To adjust the tilt on the Sandstrom SFMGL18 Mount, locate the tilt adjustment screws on the mount. Loosen them slightly, adjust the tilt to the desired angle, and then retighten the screws to secure the position.
If the mount's arms feel loose, check that all bolts and screws are tightened according to the installation manual. If necessary, use a wrench to ensure all fittings are secure.
It's recommended to check the mount every six months for any signs of wear or loosening. Ensure all screws and bolts are tight and inspect for any damage to the mount or wall.
Ensure the wall can support the mount and TV weight, verify the use of appropriate anchors, and avoid placing the mount near heat sources or in high-traffic areas. Always follow the installation instructions carefully.