Sandstrom SFF4DS11 Instruction Manual

To adjust the temperature settings, locate the temperature control dial inside the refrigerator compartment. Turn the dial clockwise to decrease the temperature and counterclockwise to increase it. Refer to the manual for recommended settings.
Ensure that the refrigerator is plugged in and the power is on. Check the temperature setting to ensure it is set correctly. Clean the condenser coils and ensure there is adequate ventilation around the unit. If the problem persists, consult a professional technician.
The Sandstrom SFF4DS11 is designed to be frost-free, so manual defrosting is not required. However, if you notice any frost buildup, ensure the door seals are intact and not obstructed.
To clean the interior, unplug the refrigerator and remove all food items. Use a soft cloth and mild detergent to wipe down the surfaces. Rinse with a damp cloth and dry thoroughly before plugging the unit back in.
Water pooling can be caused by a blocked defrost drain. Check and clear any obstructions in the drain located at the back of the refrigerator. Ensure that the refrigerator is level to prevent water from accumulating.
To change the light bulb, unplug the refrigerator and locate the light cover inside. Remove the cover by unscrewing or unclipping it. Replace the bulb with one of the same type and wattage, then reattach the cover.
If the door seal is damaged, it should be replaced to maintain the refrigerator's efficiency. Contact Sandstrom customer support or a professional technician to obtain a replacement seal and for installation assistance.
Before moving, empty the refrigerator and secure all shelves and drawers. Keep the refrigerator upright during transportation to prevent damage to the compressor. Use a dolly and enlist help for safe handling.
Ensure there is at least 2 inches of space on all sides of the refrigerator for adequate ventilation. This helps maintain efficient cooling and prolongs the life of the appliance.
To maximize energy efficiency, ensure the door seals are clean and undamaged, keep the temperature settings within the recommended range, and avoid placing hot items directly inside the refrigerator. Regularly clean the condenser coils to improve efficiency.