Sandstrom SDW60B10 Instruction Manual
![Sandstrom SDW60B10 manual cover](/images/SmlLFENfuSYGLmXjeKHjuFhl/thumbs/thumb175x175.webp)
To reset the Sandstrom SDW60B10 dishwasher, press and hold the Start/Reset button for about 3 seconds until the control panel lights flash. This will reset the current cycle.
Check the drain hose for kinks or blockages. Ensure the sink’s drain is clear. Clean the dishwasher filter and check for any obstructions in the sump area.
Remove the lower dish rack to access the filter. Twist the filter counterclockwise to remove it. Rinse it under running water and use a soft brush to clean off any debris.
Place larger items like pots and pans on the lower rack and smaller items like cups and glasses on the upper rack. Ensure that nothing obstructs the spray arms.
Ensure that the rinse aid dispenser is full as it helps with drying. Select a longer drying program and make sure that the dishwasher is not overloaded.
It is recommended to run a cleaning cycle once a month using a dishwasher cleaner or a mixture of vinegar and baking soda to maintain optimal performance.
Check for items that may have fallen into the bottom of the dishwasher and are interfering with the spray arms. Ensure that dishes are properly loaded and not banging against each other.
Rinse off large food particles before loading, use the appropriate amount of detergent, and select a suitable wash cycle for heavily soiled dishes.
Error code E4 indicates a water overflow issue. Check for any blockages in the inlet valve, and ensure the dishwasher is level to prevent water accumulation.
Yes, tablet detergents can be used. Place the tablet in the detergent dispenser and ensure the dispenser door is closed properly before starting the cycle.