Sandstrom SDH50L19E Instruction Manual
![Sandstrom SDH50L19E manual cover](/images/npvxpXUcfRBLlazrYlVgWMph/thumbs/thumb175x175.webp)
To set up the Sandstrom SDH50L19E, first position it in an upright position on a flat surface. Ensure there is at least 20 cm clearance around the unit for optimal air circulation. Plug it into a suitable power outlet and press the power button to turn it on. Adjust the humidity settings as desired.
If the dehumidifier is not collecting water, check that the humidity setting is lower than the room's current humidity. Ensure the filter is clean and the air intake and outlet are not blocked. Verify that the room temperature is above the minimum operating temperature specified in the manual.
The filter should be cleaned every two weeks to maintain optimal performance. Remove the filter, wash it with warm water and mild detergent, then let it dry completely before reinserting it into the unit.
The recommended indoor humidity setting is between 40% and 60%. This range is comfortable for most people and helps prevent mold growth and other humidity-related issues.
To reduce noise, ensure the dehumidifier is placed on a level surface and that all screws and fittings are tight. Additionally, check for any obstructions in the fan or air pathways that may cause additional noise.
The dehumidifier may shut off automatically when the water tank is full, if the set humidity level is reached, or if the room temperature is too low. Check the water tank and empty it if necessary, and ensure the settings are configured correctly.
To improve efficiency, close all windows and doors in the room, place the dehumidifier in the center of the area, and ensure it is away from walls and furniture. Regular maintenance, such as cleaning the filter and coils, also helps maintain efficiency.
When storing the dehumidifier, clean and dry the water tank and filter. Coil the power cord neatly and store the unit in a cool, dry place. Cover it with a cloth or plastic to prevent dust accumulation.
The Sandstrom SDH50L19E can be used continuously if set to a continuous mode. Ensure the water tank is regularly emptied, or use a continuous drainage option if available to prevent the tank from filling up.
Refer to the user manual for specific error codes and troubleshooting steps. Common solutions include checking the water tank, ensuring proper airflow, and resetting the unit by turning it off and unplugging it for a few minutes.