Sandstrom SDH10L19E Instruction Manual
![Sandstrom SDH10L19E manual cover](/images/RHgHAdqzXnznFtFGRIkUuWDH/thumbs/thumb175x175.webp)
To set up your Sandstrom SDH10L19E dehumidifier, place it on a flat, stable surface with at least 20 cm clearance on all sides. Insert the power plug into a grounded outlet and select your desired settings.
Ensure the room temperature is above 5°C and the humidity level is above 50%. Check if the tank is full or incorrectly placed. Clean the filter and ensure the unit is set to the correct mode.
The filter should be cleaned every two weeks to maintain optimal performance. Remove the filter, use a vacuum cleaner or wash it with warm water, and let it dry completely before reinserting.
Yes, the Sandstrom SDH10L19E can be used in a bathroom, but ensure it is kept away from direct splashes and placed in a well-ventilated area.
Regularly clean the air filter, empty the water tank, and wipe down the exterior with a damp cloth. Check the power cord for damage periodically.
Unusual noise may be due to an uneven surface or loose components. Ensure the dehumidifier is on a level surface and check for any loose screws or parts.
Use the control panel to adjust the desired humidity level. Press the 'Humidity' button to set the level between 30% and 80%, depending on your needs.
The 'full tank' indicator lights up when the water tank is full. Empty the tank and reposition it correctly before restarting the unit.
Yes, the dehumidifier can run continuously. However, monitor the water tank to prevent overflow and ensure proper operation.
Clean the filter, empty the water tank, and ensure the unit is dry. Store it in a cool, dry place away from direct sunlight and dust.