Sandstrom SDABXRL13 Instruction Manual
![Sandstrom SDABXRL13 manual cover](/images/HznSPPoLpjenvTnwuwoLSobT/thumbs/thumb175x175.webp)
To set the alarm, press the 'Alarm' button, use the tuning dial to set the desired alarm time, and confirm by pressing the 'Select' button. Ensure the alarm icon appears on the display to indicate it's active.
Check if the power cable is properly connected and the outlet is working. If using batteries, ensure they are correctly inserted and charged. Try resetting the radio by unplugging it for a few minutes.
Extend the antenna fully and try adjusting its position. Relocate the radio to a higher location or near a window to minimize interference. Avoid placing it near other electronic devices.
Tune to the desired station, then press and hold a preset button (1-5) until you hear a beep. The station is now stored and can be accessed by pressing the corresponding preset button.
Ensure the volume is not muted or set too low. Check if headphones are plugged in, which can disable the speaker sound. Verify that the radio is tuned to a valid station with a strong signal.
To perform a factory reset, press and hold the 'Menu' button until the display shows 'Factory Reset', then confirm by pressing the 'Select' button. All settings will be restored to default.
The Sandstrom SDABXRL13 Radio is compatible with 4 AA batteries. For optimal performance, use high-quality alkaline or rechargeable batteries.
Press the 'Mode' button on the radio repeatedly until the display shows the desired mode, either DAB or FM. The radio will automatically scan and tune available stations in the selected mode.
Yes, you can connect external speakers via the headphone jack using a compatible audio cable. Ensure the radio volume is adjusted to a suitable level for external speakers.
Currently, the Sandstrom SDABXRL13 Radio does not support firmware updates. Ensure you follow the manufacturer's guidelines for optimal use and maintenance.