Sandstrom SCARIABK16E Aria Instruction Manual

To set the alarm, press the 'Alarm' button, use the 'Tuning/Select' knob to set the desired alarm time, and confirm by pressing the 'Select' button. Ensure the alarm mode is set to 'On'.
Check if the volume is turned up, ensure the radio is plugged in or has fresh batteries, and verify that it's on the correct mode (FM, DAB, etc.). If the issue persists, try resetting the device.
Extend the antenna to its full length and try repositioning the radio near a window or away from other electronic devices to reduce interference.
Ensure the radio is powered on. If using batteries, check if they need replacement. For AC power, verify that the power cord is securely connected. If the issue continues, perform a factory reset.
To perform a factory reset, navigate to 'Settings' using the 'Menu' button, select 'Factory Reset', and confirm the selection. This will erase all settings and presets.
Yes, turn on the Bluetooth mode on the radio, enable Bluetooth on your smartphone, and select 'SCARIABK16E' from the list of available devices to pair.
Tune to the desired station, press and hold a preset button (1-5) until you hear a beep to save the station to that preset number.
The Sandstrom SCARIABK16E radio uses 4 AA batteries for portable operation.
Press the 'Mode' button on the radio repeatedly until the display shows the desired mode, either DAB or FM.
Ensure that the radio is set to the correct time zone and connected to a DAB signal for automatic time update. If needed, manually set the time via the 'Settings' menu.