Sandstrom S6PB6K14 Instruction Manual
![Sandstrom S6PB6K14 manual cover](/images/GKdqUXnJPjChYXtdObtwGFxp/thumbs/thumb175x175.webp)
To charge the Sandstrom S6PB6K14 Power Bank, connect the included USB cable to the power bank's input port and plug the other end into a USB power adapter or a computer's USB port. Ensure the power adapter is plugged into a wall outlet.
The Sandstrom S6PB6K14 Power Bank features LED indicators that show the charging status. When all LED lights are illuminated and steady, the power bank is fully charged.
First, check that the device is properly connected to the power bank using a compatible charging cable. Ensure the power bank has sufficient charge by checking the LED indicators. If the problem persists, try using a different cable or charging a different device to isolate the issue.
Yes, the Sandstrom S6PB6K14 Power Bank supports pass-through charging, allowing you to charge the power bank itself and your device at the same time. However, this may result in slower charging speeds for the connected device.
To maintain the battery health, avoid exposing the power bank to extreme temperatures and do not overcharge it. Charge it periodically and avoid letting it discharge completely on a regular basis.
Store the power bank in a cool, dry place, ideally at room temperature, and ensure it has a partial charge (around 50%) if you plan to store it for an extended period.
Slow charging can be caused by using a low-output power source or a faulty cable. Ensure the power adapter used supports fast charging and try using a different cable to see if the issue persists.
Yes, it is normal for the power bank to become slightly warm during charging due to the energy transfer process. However, if it becomes excessively hot, disconnect it immediately and allow it to cool down before further use.
The number of charges depends on your smartphone's battery capacity. On average, the Sandstrom S6PB6K14, with its 6000mAh capacity, can charge a typical smartphone 1.5 to 2 times.
If the power bank stops working, try resetting it by connecting it to a power source. If it still doesn't work, check the warranty and contact Sandstrom support for assistance or potential repair options.