Sandstrom S6P20PD21 Instruction Manual
![Sandstrom S6P20PD21 manual cover](/images/sPWXitfYHyKMjKGQDqyIJYkj/thumbs/thumb175x175.webp)
To charge the Sandstrom S6P20PD21 Power Bank, connect it to a USB power adapter using the included charging cable. Plug the adapter into a wall outlet. The LED indicators will show the charging progress.
Press the power button on the Sandstrom Power Bank to activate the LED indicators. The number of lit LEDs indicates the remaining battery life.
Ensure that the power bank is adequately charged. Check the connection between the power bank and the device. Try using a different cable. If the problem persists, reset the power bank by pressing and holding the power button for 10 seconds.
Yes, the Sandstrom S6P20PD21 allows pass-through charging, enabling you to charge the power bank and a device simultaneously.
Charging time can vary depending on the power source, but typically it takes around 6 to 8 hours to fully charge the Sandstrom S6P20PD21 Power Bank using a standard USB power adapter.
Store the power bank in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it's charged to about 50% if you plan to store it for an extended period.
To reset the power bank, press and hold the power button for about 10 seconds until the LED indicators flash.
The Sandstrom S6P20PD21 Power Bank is compatible with most USB-powered devices, including smartphones, tablets, and some laptops. Ensure your device supports USB charging.
It's normal for the power bank to get slightly warm during charging. However, if it becomes excessively hot, disconnect it immediately and allow it to cool down. Check for any damage to the power bank or cables.
To maintain optimal battery health, it's recommended to recharge the power bank every few months if not used regularly. Avoid letting it discharge completely before recharging.