Sandstrom S6P15PD21 Instruction Manual
![Sandstrom S6P15PD21 manual cover](/images/mECuRzsDLtFXeJicCXFjHHTE/thumbs/thumb175x175.webp)
To charge the Sandstrom S6P15PD21 Power Bank, connect the USB-C input port to a power source using a compatible cable. The LED indicators will light up to show the charging progress. Once fully charged, all LEDs will remain lit.
Ensure that the power bank is charged, and check the connection between the power bank and your device. Try using a different cable or port, and ensure your device is compatible with the power bank's output.
Press the power button on the Sandstrom S6P15PD21 Power Bank. The LED indicators will light up to show the current battery level. Each LED typically represents 25% of the charge.
Yes, the Sandstrom S6P15PD21 supports pass-through charging, allowing you to charge both the power bank and a connected device at the same time.
Store the power bank in a cool, dry place, away from direct sunlight and extreme temperatures. Make sure it has a partial charge (around 50%) if it will not be used for an extended period.
To reset the Sandstrom S6P15PD21 Power Bank, disconnect all cables and press the power button for approximately 10 seconds. This should reset the device and resolve minor issues.
The Sandstrom S6P15PD21 includes overcharge protection, short circuit protection, and temperature control to ensure safe usage.
The charging time for the Sandstrom S6P15PD21 Power Bank can vary depending on the power source, but it typically takes around 6-8 hours to fully charge with a standard charger.
Yes, the Sandstrom S6P15PD21 Power Bank is typically allowed on planes, but always check with the airline's regulations regarding the use and transportation of power banks.
To clean the Sandstrom S6P15PD21 Power Bank, gently wipe the exterior with a soft, dry cloth. Avoid using any liquids or harsh chemicals, as they may damage the device.